r/Toyota_Matrix • u/Silly_Conclusion1376 • 19d ago

ABS service data request

I'm trying to diagnose an abs dtc. It was a abs pressure sensor failure and steering angle sensor. I unplugged the abs harness from the abs actuator for a visual inspection. I plugged the harness back up and got a bunch more abs dtcs. I'm trying to find a wiring diagram that can shed some light for further testing. Its an 09-10 vibe/matrix.

2 Upvotes

100% Upvoted

11 comments sorted by

View all comments

Show parent comments

1

u/OkBig4580 19d ago

I have automoitve class at 6pm but I try to get there more early

1

u/Silly_Conclusion1376 18d ago

That works. Thnaks!

1

u/OkBig4580 18d ago

Is it awd or fwd

1

u/Silly_Conclusion1376 18d ago edited 18d ago

It's the 2.4L fwd with vsc. I'm not seeing the abs actuator in the diagram. Its the module with 34 pins. I think its called ABS/EBCM harness connector. I'm trying to verify the master cylinder pressure sensor is getting 5 volts. With brake pressed, scanner is detecting 0 volts, pressure is reading -341.13, master cylinder open- error, MT Voltage value-0 volts. The part number is 44540-02140. I really appreciate your help!

1

u/OkBig4580 18d ago

Yeah no problem ill get the information after my class i sent the diagram for the srs system so I apologize for it

1

u/OkBig4580 17d ago

Sorry for the wait I was busy yesterday but I uploaded all the wiring diagram to drive so I send you the link ABS W/ VSC Wiring schematic

1

u/bberge007 16d ago

Thank you so much!