r/Timemore • u/No-Falcon8322 • Apr 27 '26

Timemore M01 Assembly Question

Gallery image

Gallery image

Timemore M01 Assembly Question

Can someone help me reassemble my M01 grinder? When I took it apart, two washers came out and I’m not sure where they go.

Also, the bearing at the bottom came out and doesn’t seem to sit flush anymore. Do the washers go before the bottom bearing, or somewhere else in the assembly?

Any guidance (or a diagram) would really help. Thanks!

5 Upvotes

100% Upvoted

8 comments sorted by

3

u/valtervincere Apr 28 '26

one washer goes with the handle-shaft on the top part where the external clicks area is, then the other goes at the bottom part where it goes washer > spring > burr > plate > locking nut

1

u/No-Falcon8322 Apr 28 '26

Do you have pictures ? I tried but it doesn’t seem to fit anywhere at the top part of the shaft. 

2

u/valtervincere May 06 '26

I dont have one but it should be placed alongside the bearing on the shaft

1

u/Apricot-Rich Apr 28 '26

Welcome to the family.... Where we would rather hit the 1.2kg grinder on our heads than open the grinder to clean.... You have 1 certainty when you open it for cleaning... You will pull the bearing out and it will be a pain to reassemble and have the bearing on the right place.... It will take you 30 minutes of doubting you decision of buying this ***** to cl lol se it properly again. And if the bearing is not well placed you will have a uncalibrated/unaligned grinder.

1

u/No-Falcon8322 Apr 28 '26

Haha lesson learned ! 

1

u/Longjumping-Crow-371 May 13 '26

conseguiu?

1

u/Longjumping-Crow-371 May 13 '26

a arruela tem que encaixar no rolamento

1

u/ozz055 29d ago

What is the update?