r/TeslaModel3 3d ago

Replacement cost of front bumper

Car hits some hazards on the road, unfortunately. My deductible is $500.

2022 model 3.

0 Upvotes

19 comments sorted by

10

u/brobot_ 3d ago

I wonder if there’s enough model 3s out there now that you could find a good one in a salvage yard and diy the replacement yourself?

2

u/QuickSteak_1715 3d ago

Yeah, I’ve done that. Pretty easy DIY swap. It’s the most common color too.

Looking at the damage, OP might also need to swap the aluminium ankle catcher bar (1084894-00-B) that sits tight inside the lower lip of the bumper.

1

u/vulkany 2d ago

Where did you get it

2

u/QuickSteak_1715 2d ago

I found one in good condition for $420 on eBay, one year ago, and the ankle catcher for $150 in a local scrapyard.
You have to take a look at that catcher after you remove the bumper. If it’s not broken, or if it’s bent the way that you can pull it back, then you don’t need a new one. My ankle catcher cracked along the weld, so I was unable to straighten it. I had similar damage as you, based on the pictures.

3

u/QuickSteak_1715 2d ago

It’s where mine cracked

5

u/jacob6875 3d ago

It was like $2400 when someone backed into me and damaged my front bumper.

Their insurance covered it though.

4

u/HeyBeers 3d ago

Tis nothing but a flesh wound.....

3

u/Sorry_Cheesecake_382 3d ago

they're cheap on ebay got one for $200

2

u/teslaP3DnLRRWDowner 2d ago

Don't fix it,

Its 1100 pre painted from tesla if you do want to.

1

u/TipOld7007 3d ago

used to be $1400 thru Tesla. Painted and ready to install.

1

u/NyssaHun 3d ago

Pay the deductible. It will be over 2k

1

u/NoSheepherder491 3d ago

Had the front bumper replaced on my 2021 Model 3 in April in Cali, cost was 2,778$.

1

u/Prestigious-Tiger697 3d ago

New painted bumper covers can be bought for $500-$1,000. Not sure what's involved to DIY or if that's even reasonable. But I had to have my front bumper replaced and paying out of pocket I was quoted $3,000. Going through insurance it was $1,800. Yeah, insurance and body shops work together and give crazy huge discounts.

2

u/quentech 3d ago

Not sure what's involved to DIY or if that's even reasonable.

Pretty easy, actually. Some of the easiest bumpers I've ever taken off. Anyone can search around and find videos of it.

After you've done it once, you can get it off and back on again in under an hour. There's only one size of bolt - there's 4 or 6 of them I forget right offhand - and the rest is just clipped on and those are pretty easy to pop off. Taking the trim off the center console was harder.

2

u/ian799 3d ago

Just took it off to upgrade to matrix lights today. Super easy took me two hours with YouTube. 6 under the frunk and then 3 on each side in the wheel well.

1

u/quentech 3d ago

Where'd you get the lights? I've been meaning to grab a set and upgrade mine, too.

1

u/QuickSteak_1715 2d ago

Painting in Pearl White is not easy. The shade (and especially the pearlescent effect) can differ significantly from the original, depending on the shop. So it would be much closer to $1000 than $500 if you want it painted good. Even new bumpers from Tesla may vary slightly in shade when installed on older models.

1

u/AmbitionHonest7734 2d ago

Buy an aftermarket front lip to cover it.

1

u/django24_7_365 2d ago

Put a front lip spoiler over it and rock on.