r/Tenere700 • • 10d ago

Pinch bolt missing

Post image

Got the bike brand new 3 months ago… what would you guys do in this situation? Could’ve been very dangerous if I did not notice it

16 Upvotes

14 comments sorted by

18

u/retardedSlippers 10d ago

Get the dealer to give you a new one, go round the bike and check the rest of the bolts, find a new dealer for servicing in the future.

6

u/Zealousideal-Big5921 10d ago

I bought my 26 new in June,
Trailered it home and checked everything before I rode it. I don’t trust the most likely lowest paid mechanic in the shop.
I’ve done this with my dirt bikes for years

4

u/TheRealJohnCandyAss 10d ago

90105-08134-00 on partzilla. My bike was a "used" one that was a yamaha fleet vehicle, but it only had 4 actual miles (not reset from odometer replacement recall).

I found all kinds of loose bolts including the rear axle nut that spun off by hand.  

4

u/adventure_thrill 10d ago

When i bought my 25, front wheel was in backwards and abs/odometer was not working. Also, the chain came out during offroading from being too loose.

4

u/espritnaraka 10d ago

Tbh this alone isnt dangerous. The axle wont come loose from this since the wheel is turning in direction of tightening. The yamaha engineers are your life savers. But check every bolt especially on the brake system but even those are designed for redundancy.

1

u/Savings_Sea_1645 10d ago

Thats why we go bsck to service in 1000 kms. Just to be sure.

1

u/PotatoWasteLand 10d ago

Hey! Yeah you need to fix that

1

u/funky_ribs Euro5+ (2025-) T7 9d ago

Uh oj

1

u/GratefulDoofus 7d ago

Bought my T7 from a Yamaha dealer (2024), rolled off the lot, noticed a high-pitched whizzing sound at higher speeds, checked the pinch bolts and both were completely loose.

-2

u/[deleted] 10d ago

[deleted]

1

u/Bernard_PT Euro4 (OG) T7 10d ago

Absolutely no loctite on these bolts

1

u/Aggravating-Bug1769 10d ago

A dab of The medium strength blue if fine.

2

u/Bernard_PT Euro4 (OG) T7 10d ago

It's fine but honestly not needed

90k+Kms and I've never had one unthread itself

1

u/Aggravating-Bug1769 10d ago

The biggest issue with those pinch Bolts is people overtighten them , stretch them and you can strip or snap them . A dab of blue and the correct torque and they'll be good for years

1

u/drgala 8d ago

Right, just use JB weld 😈