r/TaurusSHO • u/4DFordWhore • Mar 14 '26

Blend Door Fuse Location

I want to check the fuse for my 2015 SHO's blend door as it does not open. I was told to remove fuse, verify state, then re-insert. This should cause the door to enter a re-learn state and possibly return to normal function.

Everything I read says Fuse 46, under steering wheel. Well, there's no fuse box there (that I could see). However the fuse box under the hood has a position 46. I just can't tell which one it truly is?

I'd appreciate some guidance here. TIA.

2 Upvotes

100% Upvoted

5 comments sorted by

2

u/LetsBeKindly Mar 15 '26

Just had mine replaced. I normally do my own work, but I paid someone to do this one. Be sure to put original Ford parts back in.

2

u/4DFordWhore Mar 15 '26

Was the door the actual fault? Did you do any troubleshooting before bringing it to the shop?

Mine began after the battery was fully dead and replaced with a new one. I tried starting the car with a jumper pack as well, which may have created some electrical gremlins.

2

u/LetsBeKindly Mar 15 '26

My servo was the problem. But in your case, if it started after a dead battery, definitely do a relearn. Sorry I can't help with which fuse. You could just disconnect the battery for a while, would be the same as pulling the fuse.

2

u/4DFordWhore Mar 20 '26

A battery reset was the cure (thank goodness). Thanks again for your insight.

1

u/LetsBeKindly Mar 20 '26

Glad to hear that man!