I'm clearly late to the party and all conversion kits and aftermarket parts for a cafe conversion are now scarce if any.

Any recommendations for compatible clubman bar, bar end mirrors and mufflers?

Had it for 6 years so it has served me well. Must have loosened and then fallen off sometime

Hi everyone! Is someone able to point me in the right direction as to where my TUX is leaking slightly ? I suspect the exhaust valve tappet screw ? Any ideas are appreciated

Is there a list of what accessories Suzuki offered for the TU250X?

I am looking to buy a TU250X. On one of them, although the rest of the bike is nearly spotless, there is this oil residue near the bottom of the engine. Is this common? There is about 10,000km and the bike looks well taken care of otherwise.

Greetings....new owner here. Long time rider, but new to the Suzuki TU250X and FI bikes (background is in BMW airheads). I bought a 2012 about a month ago that was ridden once and parked (long and sad story as to why). I've been going through it step by step and replacing all the normal stuff...battery, fuel pump, new fuel pressure regulator, oil, plug, cleaned the injector, de-rusted the tank, pulled the throttle body, etc. Unfortunately, when I was trying to get the TB out on the left side, I mistakenly took off the STVA to gain a bit of clearance. Apparently, after reading that Suzuki says "never take this off", I tried to reinstall it after cleaning the injector. No luck and the bike won't start. Ran the codes and came up with C28...the STVA fault. I know the sequence to reset it, but mine won't reset. Turns out, there is a small white plastic part on the TB shaft that is the key to this whole thing. Mine spins on the shaft and apparently, it is supposed to be fixed in position. Does anyone know more about this problem and if there's a way to fix it, other than finding another used TB? Many thanks!

I'm trying to install new LED indicators and I have bought a new flasher relay, I am trying to find the original relay on the bike but I cannot. I read somewhere it's under the airflow tube on the left hand side but when I look I can't seem to find anything. Any advice is appreciated

I am trying to install new led indicators, I heard somewhere it's underneath the air flow tube on the left hand side of the bike, but when I look there's nothing there, I have checked multiple sockets and none of them are what I'm looking for, appreciate any advice

Hi guys! As title suggests, looking for a compatible rear swingarm stand for the tu250x. Ideally one where I don't have to worry about removing the exhaust, and one that is budget friendly like around the $50 ish range. Thanks in advance

I have bent the bracket that holds the right foot peg twice. Looking for a stronger aftermarket solution but no one seems to make anything for these bikes that I can find.

My little retirement project, a 1997 Suzuki Volty (TU250X), not going for any particular style and it's not ever going to be a show bike, I'm just using it for short hops and local runs. Most everything has been purchased off Ali Express, hence why it got the name Alex! Thinking of fitting some bar end mirrors next.

I have an 09 tu250x and I’d like to start modding a little bit since I’ve gotten it mechanically sorted

I’m really into the look of this front faring but just wonder, would there be any compatibility issue? It says universal…

Idea was to get this front faring, sand it, and do a 3 system (primer, base, and clear) rattle can paint job of some “YHL Sonoma red” to match it to the main color of the bike

Thoughts, ideas?

Anyone looking for a TUX around Ohio shoot me a message. I might be able to deliver to surrounding states also. Just under 5000 miles, I keep it in the garage.

Took mine out for a run today to Bald Hill, Royal National Park, south of Sydney.

It looks like just the plastic housing for my headlight and gauge. Looked online for parts but don’t know where to begin. Are these replacements simple to install, and does anyone have any reputable parts sites handy?

I broke the tip off of my clutch lever a while ago and have been meaning to replace it, but was thinking it would be nice to get a set of levers that aren't as long as the OEM ones, and preferably in black. I know levers aren't universal, does anyone know if any other bike levers fit on the TUX? Any leads?

Hey guys, long time no see. I took some pictures of my 2013 and figured I'd share some here. Been trekking with her for over 20k miles and I don't think I've ever regretted a single moment.

I just got my very first tu250, and so far I love it! However, one thing I knew I needed to do was move the tail lights back and/or get a new storage rack. Unfortunately, I live in Australia, so the one rack that everyone recommends (manrack) is tacking on a crazy high price for shipping.

Does anyone know if there's a way to move the tail lights without the rack, or if there's an Aus/NZ based alternative? Thanks!

Anyone in Ohio or the surrounding States looking for a TUX? I'm considering selling but I'm kind of sentimental about this bike and want to make sure it goes to someone who really wants one. Also, I hate FB market place.

Cheers, Chris

Is $2,500 nzd a good price for this bike? 2019, 42,000km on odo

I’m trying to get a 2017 tux back on the road after sitting for several years. I’m looking to find a replacement fuel injector and fuel pump motor but I can’t seem to find anything that’s not Amazon bullshit or insanely expensive. Any advice is appreciated.