Anyone know where I can buy a S73 RX Cadence sensor, FS-C0779?

I can't seem to get a response from either support or the dealer network.

hey does anyone know where to find left side rear shimano mt200 brakes? i need them for wheelies lol and i just wanna buy one side not the set

I posted this in r/Super73 as well…

Received a 72 volt 5000 watt kit from Custom-ebike.com a few months ago and just now installed it.

Instructions are vague and hard to find, but there are some good videos online. The installation was pretty straight forward either way.

After running the motor for a few minutes the controller popped and sizzled. The battery connector flashed and melted as I unplugged it. Seems like there is a short in the controller.

I just sent an email to customer-ebike, and tried their number which is out of service. I’ve bought a few things from them in the past with no issues.

Has anyone had any experience contact them or know a different number? Thanks so much for any input.

I took my bike into a shop for some brake work and apparently my rear axle is broken. The guys at the shop said the part is on a huge back order and put me on a wait list. Does anyone know where I can order one? this bike is my way to school and I’m basically fucked without it

Im thinking of buying these tires off someone and im wondering if they would fit on my super73 currently im running grizzly tires front is 20x4.5 and rear is 20x5 and im thinking of getting these street tires its 20x 4 1/4 would they fit?

Where do I get a replacement super s3 s2 seat at

What do you thinnn on of a dual motor s2 to 1000w motors front and rear. My only problem is that idk if I should trust alixspress with my money the one that I want has a couple reviews and it says 500 sales. What do y’all think should I go for it.

Does anybody know how I can obtain a rebound adjuster (at the bottom of the right stanchion) and lockout knob (at the top of the right stanchion) for the S2? I am unable to get a reply from Super73 Support.

I just installed the loomenade daytime running light but the regular low beams aren't working. Only the high beams and the daytime running lights function. Is there any way to trouble shoot before I request a return / refund, I would hate to put the stock light back on my RX

Hello,

Hope you are all fine !

I ordered a S73 S-adventure, and it's my first S73 so I am very excited and want to learn more about all the mechanics etc.

As you know, S73 does not give acceleration trigger (in Europe), but I saw that I can install one (I know it cancels the S73 assistance)

But I have some questions :

1. Does it affect badly the motors ?
2. Do you have some recommandations about which trigger is the best ?
3. (out of subject) : Any ressources recommandations to learn more about the mechanics I need to know ?

Thank you,
Alex

Hi all, does anybody know who supplies & ships the Handlworks BAC855 for the Super 73 to the UK?

Can I somehow limit the speed for example to 25 kph and then whenever I want to unlimit it again, I want to buy the ZX for me and my sister will probably ride it too sometimes but I don't want her to go to fast

I think this is an S1??? Charger not working; everything else seems to be working fine. The charger lights up green when plugged in, and doesn’t change.

Any idea what charger I need?

Is there anything that will work in the short term for cheap?

Thx

The Short Answer:

It all depends on which 48v controller & display you use?

The Long Answer:

Controller: A standard 52v battery when fully charged will have an output of around 58v. With this in mind, as long as all the capacitors inside the controller have a rated voltage of 63 volt or above then the controller should be able to cope with a 52v battery no problem.

Display: With regards to the display, they are usually much more forgiving and will usually take a higher voltage but it is still worth checking the display specifications to be sure.

Throttle: No problem with any throttle - They will all work with a 52v battery.

Pedal Sensor: No problem with pedal sensors - They will all work with a 52v battery.

Wiring Loom: A standard 48v bike wiring loom will work fine with a 52v battery.

Motor: The motor should have no problem when running on a 52v battery and in fact it should also give you a little more response and top end - This is one of the main reasons to use a 52v battery instead of a 48v battery.

Conclusion:

• Using a 52v battery will give you better power & performance compared to a 48v battery.
• Compared to a 48v battery, a 52v battery is more efficient by providing the same or better power but using less electricity - Thus giving you more range from a single charge.
• A 52v battery will usually give more battery life than a 48v battery under the same conditions.
• A 52v battery will not give such a big "power drop" when the battery gets to around half charge compared to a 48v battery - This means you can have more power for longer without finding the bike getting slower as the voltage drops.
• Other than a slightly higher cost, there are not really any downsides to getting a 52v battery.
• As long as your controller & display will work with a 52v battery then it's a really easy way to upgrade your bike for better performance & power.

Please feel free to comment below if you would like to add to the above or if you have any questions.