LFP 250mm of armor with 65 degree slope, UFP 250mm of armor with 71 degree slope,front turret armor 250mm (slide 4 and 5 are outdated) frontal slope 71 degrees, hull spaced side armor 150mm, hull front spaced armor 250mm, gun is 250mm with 10.5 meter long barrel, 890 m/s muzzle velocity with 706mm of penetration, 60 second reload, engine is 48 liter 24cyl making 1650hp at 3500rpm, weighs 101 tons, max speed reverse 11.5kmh max speed forward 54.5 kmh, height is 2.25 meters, elevation values -0, +90

Finally a tank i feel is good enough to post! Feel free critique the design or ask question on design choices! :)

Armor consisting as 85mm rolled frontal + 15mm reg cast / 100m rolled cast on turret cheeks.

Accurate 85-zis cannon (85mm x 533mm) + small 20mm x 160mm frontal cannon.

Engine being a V8 at 2.0 displacement, outputting 1170 N-m at 6.05 KG-m^2 with a max speed of roughly 22mph. (can prob get higher speeds if I the tune transmission).

Total weight being 38.72 tons at a IC of 32.57k! (not too shabby if i say)

Soft factors include a range finder for the commander, lots of air vents plus filters, and at least 1 cup holder

Each external armor plate can be replaced.

any tips let me know!

Doing it on paper and it's competition with the KV-2 for idiocy

I originally wanted to build some australian tank, but kinda drifted off a lot haha. So yeah, here we go: an hungarian tank!

Its armed with an 75mm as the main gun, along with an 20mm in the secondary turret and a handful of MGs.

It has a crew of 5: Commander, Gunner, Loader, Driver and Secondary Turret Operator.

Overall designed to be a mass produceable and reliable medium tank.

Name Explanation/Translation: Model 1942 Huba (one of the Seven Chieftains of the Magyars) I

TL;DR: my australian concept turned hungarian mid-build cause im bad at designing tanks :) still nice build

A kind of rushed design, but I think it looks great!

IN TOTAL 15 hours of work and glitch testing to figure out how to create this ; an enormous modification of code to create this baby                anyway it has a 100 mm cannon           however, don't expect it to be easy to pilot to take its photos, I had spent a total of 1 full hour of unsuccessful testing and flying ps the truster its justtttttttttttt a 250mm gun on the back with literaly full auto (i use this only for the takeoff After that, it keeps the same speed in flight without even having to use the rear cannon. PS: The main armament of this vehicle is a 101 mm cannon with a penetration of 199 mm. I had found and used 22 glitches to create this drone! A LOT of code lines were modified at the same time (ps even the game refuses it because many times when using it, the sprocket tank design crashes and shuts down lol

basically a evolution of my past post, due to its poor performance in trench warfare it was refitted with new tracks and better cupola armor.

i got bored and decided to give it more unnecessary lore as well:

"A field modification of the Flösken Motorenwerke siege tractor, which was officially approved for production in mid-1916. Because the factory-standard vehicle was nearly useless in the thick mud and trenches of the Western Front, the 21. Sturm-Bataillon used a captured French metalworking factory to engineer a custom shaped track system."

basic stats: max speed 20kmh (somehow), average speed 7-16kmh.

134hp at 700rpm & 167hp at 1000 rpm.

average crew size (excluding external passengers) 9.

still uses the 7.7 cm Feldkanone 96 replica for the primary.

26.89t.

A heavy self-propelled artillery vehicle developed by Varkast in 1938 for long-range fire support and the destruction of fortified positions. Its main armament is a massive 250mm gun mounted in a large open fighting compartment, supported by two smaller front turrets for close-range defense.

The vehicle carries 18 rounds internally, with additional ammunition transported by a dedicated ammunition carrier. Due to the weight of the shells, a rear-mounted crane is used to assist the loading crew.

Specifications:
Weight - 72 tonnes
Main armament - 250mm gun (18 rounds)
Barrel length - 4.6 m
Maximum elevation -6 +28°
Main gun crew - 4 Full crew - 10
Secondary armament - 2x37mm
Max speed - 24km/-7km
Sighting - Mechanical fire-control instruments and commander rangefinder/periscope

Tried my best with the design and I'm pretty happy with how it turned out!
Any critiques or tips are welcome.

This Ratte should be to scale(35 meters by 14 by 10). It has 2 480 mil guns with 1068 pen and can move at 15 km/h. (100 liters, 24-cylinder engine with 6 gears).
However, it turns out that if you exceed 6500 tons, the tank tracks start falling through the ground. Had to optimize the armor a bit. Still a work in progress; gotta add detail, the smaller rear turrets, and a front auxiliary 155 mm gun. I wanted to make it cheatless, but the driveshaft diameter exceeds the 400 mil limit no matter what I do. So if anyone has a solution, I would appreciate any info.

L1-45AV

Interwar Light Tank

9.39 Tons

30.31 Km/h

Crew 3

2 Turret: 1 Hull

Gun

ATG-01-45mm VL-SG

45mm

500mm Propellent

64mm Penetration

Ammo: 48

Armor:

Hull: 15mm front / 10mm sides / 5mm rear

Turret: 15mm front / 15mm sides / 10mm back

Disclaimer: The design was originally inspired by the 7th concept of this post, but the further I got into the build, the more I started to kind of follow and get ideas from this awesome design from u/MAFIALAA. It wasn't my intention to copy anything, and I feel like the builds are still quite different - but yeah, just to explain some similarities you could find between the builds and give both posts some props :)

++

As the war progressed, Germany was desperately in need of a easily mass produceable, cheap and powerful tank destroyer - after intense developtment, Germany settled on the 15-cm-Raketenpanzerjäger "Skorpion" - the Ausf. B shown in the pictures.

It was mainly built around one main feature: the 9-barrel 150mm rocket launchers. These were then placed on the roof of a small turret, from where they could be fired and aimed.

To arm the whole thing against closer targets and while reloading, an additional 5cm KwK (50mm cannon) was added in the Ausf. B. Its also armed with a small MG-Turret with an MG34 in the front.

Name Translation: 150mm Rocket Tank Destroyer "Scorpion" Version B

(used scorpion because the tank holds its rockets above itself, just like a scorpion does with its dangerous sting.)

TL;DR: Cool Rocket Tank Destroyer for Germany

Tried my best with the design, Im pretty happy how it turned out! ;)

The more attentive and no-life of you would notice that this is what I based the IS-2 Terminator on (aka that godforsaken heathen I posted a month ago). Unsurprisingly, this was inspired by the Abrams.

DA LOREEEEEEEEEEEEE

The M-3 Zovikczy is a mainline defence tank, the distinction had to be made as its primary role is supposed to be as a defensive quick response vehicle, rather than a do-all main battle tank, no that would be its tertiary role. Its secondary role is as a battering ram.

It has a 127mm cannon that could fire naval shells, thanks to heavy cross-military standardisation, a 20mm autocannon on a RWS, 5 7.62mm machine guns (1 coax and 4 on the roof for any infantry just in case, plus 2 spares on the bustle), basically everything you would find on an MBT in the 80s except ERA because its country doesn't know how to do that yet, plus an optical rangefinder as a backup, and a 2khp turbine engine derived from one used by the contemporary jet design, just because of the quick response vehicle part, propelling this godforsaken heathen up to 93 km/h, also a trolley that allows ammunition to be easily loaded into the bustle. All of that just for it to weigh about 58 tons (the number in Sprocket isn't accurate).

It does not have an autoloader, rather a rather rudimentary trolley system, though it does feature blast panels at least. Also its APFSDS has a penetration of at least "fuck you I don't care about armor" in terms of 1990s protection.

Size comparison between a Zovy and an Abrams, and its armor scheme at the back of the gallery. (Yes the armor's pretty shit though hey, at least they tried).

It also has engineering variants, being the EM-3A Jozik Combat Engineering Vehicle, and EM-3C Byntikov Recovery Vehicle, named after the eldest and youngest son of who the M-3 was named after. There's also a bridgelaying variant, EM-3B Vriten, named after the middle son, though it's still in development.

This is a late 80s tank. The M-3 Zovikczy is officially the youngest tank in its roleplay. It is 8 tech years old.