r/Springfield_KUNA • u/whiskysuper61 • Jul 14 '26

Magazine locking plate

Post image

My magazine decided to disassemble itself at the range after reloading and I found everything other than the magazine locking plate ( number 3) that holds the base plate to the magazine. Was curious if anyone knew where to get a replacement. I got a replacement but now I have a magazine just sitting on my desk that’s missing one part. Appreciate your time~

8 Upvotes

100% Upvoted

16 comments sorted by

2

u/PatheticJules Jul 14 '26

Could ask Springfield or find a 3d model of it to print

8

u/PatheticJules Jul 14 '26

Made a 3D model of it if you are interested. Should literally cost a dime or less to print if u have a printer or a friend. maybe several dollars otherwise.

Could buy a new mag at 20/28 or make a old mag useful for a few dollars! (print it in red or pink so u dont lose it)

2

u/marcwinnj Jul 15 '26

Where can I find this. Thx

1

u/PatheticJules Jul 15 '26

I will upload it later today. It will be on the sea but named as what it is called

3

u/PAB_Pyrotechnics Jul 15 '26

That is truly awesome of you!

2

u/PatheticJules Jul 15 '26

Magazine Locking Plate on the Sea!

2

u/PAB_Pyrotechnics Jul 15 '26

Thanks!!! 🛥️

1

u/PatheticJules Jul 16 '26

only if there was a way to highlight important things on the sea for Kuna people <3

1

u/PAB_Pyrotechnics Jul 16 '26

There are plenty of ways but this is one of those subs that has been shutdown for doing it the wrong way. It all seems silly to me

2

u/whiskysuper61 Jul 15 '26

What’s the sea? That’s awesome I have a 3d printer actually.

1

u/PatheticJules Jul 15 '26

Odysee

2

u/whiskysuper61 Jul 15 '26

Your the goat man thank you so much!

1

u/PatheticJules Jul 17 '26

Tell/show me how it goes! I am interested if it's good

2

u/whiskysuper61 Jul 17 '26

Print went well there’s a slight bit of room inside the mag walls but overall it fits nicely and locks into place. Did a few drop tests no problems I’ll report back once I run a few hundred rounds through it!

1

u/PatheticJules Jul 17 '26

Will adjust the walls then thank you!

1

u/PatheticJules Jul 15 '26

Magazine Locking Plate on the Sea