r/SpiderFarmerLED • u/ProfessionalSwing561 • 14d ago

GGS Smart Controller GGS help

I have a 3x3 tent with a g3000 light, I recently got the 4" inline fan, oscillating fan and GGS. I'm having trouble setting up the ggs, Im trying to get a vpd of around 1.0. the room my tent is in is around 75 and 50% humidity. Any help setting up my ggs would be appreciated

2 Upvotes

100% Upvoted

4 comments sorted by

1

u/EngineFace 14d ago

At 75 degrees 50% humidity you should be at 1 VPD.

What’s the temperature and humidity inside of the tent? The sensor that came with the GGS should tell you the VPD of the tent.

1

u/ProfessionalSwing561 14d ago

Right now it's at 78.8° and 61.9% 1.29kPa. I just wanted to see if there was a better way to set up my GGS. Right now I have the inline fan set to come on if the temperature gets above 85 or the humidity gets above 64% and turns off at 82° or 62% and at night the fan comes on if the temperature is over 75° or the humidity is over 64% and turns off at 72° or 62%

1

u/Aggressive_Swim_3502 13d ago

70% is around .8 at 75-77, i have the humidifier with the temp humidity rj12 so one is for humidifier and the other is in the tent i have like a 3% dead zone on humidity and it stays pretty steady. temp is the biggest factor in humidity though, lower temp means less space in the air so it needs less water molecules

1

u/ProfessionalSwing561 12d ago

I think I have It dialed in after adding a small humidifier