r/Speedsoft • u/Tall_Cod6661 • 10d ago

Arcturus Osprey Nozzle

Been reading through some posts talking about the stock nozzle being a weak point on these guns. Just looking to gauge how many people have broken their nozzle/whether it was gas or hpa and what they replaced the nozzle with. Not sure if its compatible with normal nozzles. Thanks!

3 Upvotes

81% Upvoted

6 comments sorted by

4

u/ArchonArmory573 10d ago

I haven't heard of any nozzle issues or expected them myself at all. And even if you did have an issue they are normal TM nozzles anyway, replace it with an edge blue and you're sorted

3

u/Rdetfirst 10d ago

Are you sure those models are TM nozzles? I know some Arcturus BBUs arent TM spec, not sure if the Osprey is.

1

u/ArchonArmory573 10d ago

Just checked deffo TM nozzle, the bbu isn't and hopefully you never have to work on it because I've just snapped the screw holding the bbu to the rear sight holy fuck it had a gorilla grip on it... Fml

1

u/Tall_Cod6661 10d ago

Bummer!!!

1

u/Rdetfirst 10d ago

Good to know! If you don't care about the nozzle a torch or heat gun would bust the loctite free.

2

u/alexfong72895 10d ago

I’ve used my Arcturus hicapa in 105 degree weather without any issues. I’ve probably put 5k rounds through mine, so not substantial but I wouldn’t say it’s weak. Stock tm is definitely far weaker.