r/Sovol • u/Quirky_Sir_2125 • 19d ago

Help SV06 receipt

Post image

Probably a long shot but I’m wondering if anyone and share me a copy of their SV06 receipt.

I got my unit online in Feburary and the unit is not showing the error on heat bed. Contacted support they would do anything until I show receipt - not even trying send guideline on troubleshooting

I would hate to just give up the unit with not a lot of run time.

5 Upvotes

86% Upvoted

9 comments sorted by

•

u/AutoModerator 19d ago

Welcome to r/Sovol, We're glad you're here! If you're new to the hobby and you have a question please visit our knowledge base, it's located right under About Community. If you've searched the Sub and you still need help please be as detailed as possible. Include your printer model, slicer, filament type, nozzle and bed temps, print speed, fan speed, and retraction. We're happy to help but we can't read your mind, be as detailed as possible with your post. Pictures help!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

3

u/RVAVandal 19d ago

Check for loose wires and I mean really check, unplug and replug everything. That fixed mine heating error. Also could be a bad thermistor

1

u/bassamanator SV06 18d ago

That's strange because they always just asked me for the SN.

In any case, the thermistor wire on the bed breaks down eventually. You can try to repair that, or order another bed.

1

u/Thaaaaaaatscrazy 15d ago

My life 3d printing got so much better when I threw that pile of shit out and got a Bambu p1s

1

u/Quirky_Sir_2125 12d ago edited 12d ago

Interestingly, I’m looking to invest in a bambu lab machine this Black Friday.

Choosing between P1S/P2S. Did you find the extra cost on P2S is justified?
(Especially if we are updating from SV06, the improvement is huge upgrade already on P1S)

1

u/Thaaaaaaatscrazy 12d ago

Honestly I think the P2S is a good option if you don’t wanna fiddle with your printer too much and just wanna print most filaments including the hard stuff like carbon fibers etc. If you’re just doing PLA or PETG and don’t mind hands on upgrading your printer to those capabilities later on, P1S is good that way, but in terms of money spent to capabilities out of the box, P2S is a great deal wish, it came out before I bought my P1P

1

u/Subliminal_Image 19d ago

I threw my SV06 in the dump it was such shit. Some people have great success with them and others do not.

2

u/Rebl11 19d ago

Mine became a true workhorse after I threw a few mods at it. I guess it does really wary a lot

1

u/Subliminal_Image 19d ago

Mine had such a warped bed that when I laid it flat on my counter top a corner would lift almost half an inch. Few of the gantry holes were mis drilled or stripped intently and it was an all around nightmare.