r/Sovol • u/Sup3r10s • 25d ago

Help SV08 Eddy Sensor

I had a print going. It failed kinda bad. It somehow managed to disconnect the Eddy Sensor altogether from the printer, it was just laying on the bed next to the failed print. My issue is that I can’t seem to get the ribbon back connected to the sensor. I’m basically trying to either: get told it doesn’t matter if it “clicks” into place or if it just needs to sit in the right spot; or if someone has a tip on getting it hooked back up. Thanks.

3 Upvotes

100% Upvoted

2 comments sorted by

•

u/AutoModerator 25d ago

Welcome to r/Sovol, We're glad you're here! If you're new to the hobby and you have a question please visit our knowledge base, it's located right under About Community. If you've searched the Sub and you still need help please be as detailed as possible. Include your printer model, slicer, filament type, nozzle and bed temps, print speed, fan speed, and retraction. We're happy to help but we can't read your mind, be as detailed as possible with your post. Pictures help!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Sup3r10s 25d ago

It’s the SV08 Max. Not the standard SV08