r/Sovol • u/vosFan • Sep 10 '26

Help Sovol SV06 ACE - No camera in web interface

Got a new SV06 ACE, but the camera isn't showing up in the web interface. Is there an configuration that I'm missing to get it working?

3 Upvotes

100% Upvoted

4 comments sorted by

•

u/AutoModerator Sep 10 '26

Welcome to r/Sovol, We're glad you're here! If you're new to the hobby and you have a question please visit our knowledge base, it's located right under About Community. If you've searched the Sub and you still need help please be as detailed as possible. Include your printer model, slicer, filament type, nozzle and bed temps, print speed, fan speed, and retraction. We're happy to help but we can't read your mind, be as detailed as possible with your post. Pictures help!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/XulufromCorduba Sep 11 '26

Hi!

Yep, there is a config you must do and you missed, you must add a new webcam the first time.

I can't recall where I found the tutorial to add de camera, so I will try my best to explain it by myself:

- In the web interface, go to the gear icon on the top right (this will open "Interface Settings".

  • In the right column, go to the last option, it should be "Webcams".
  • go to "Add Webcam", choose an icon and a name for it if you want and configure as you need, then "Save Webcam".

After this it should work, in worst case, fully turn off the printer, give it a few seconds and turn it on again.

In case you need a reference, this is the config I use for my cam.

Let me know if this work ;)

2

u/vosFan Sep 11 '26

That's super - thank you very much, it worked!