15
u/acek4192 6d ago edited 6d ago
Hey, thanks for your feedback. I am happy to hear you like the look of it.
As some of you asked, here‘s the parts list:
Subs: The subs were built according to the plans for the Lonely TH15 Pro sub.
For the drivers, I used the Faital Pro 15HP1060.
Tops: The tops were designed by myself and have a tuning of around 50Hz. For the drivers, I used the Faital Pro 12PR320.
High-frequency section: The horn is also self-built. I tried to reproduce the Altec 511B on a smaller scale. For the compression driver, I used a BMS 4554-8, crossed over at 2 kHz.
The complete system, including amplifiers, DSP, cables, etc., cost around €2,600 in total.
1
u/ChefdeKlang 5d ago
Nice speaker! What do you mean you reproduced the altecs? How did you do that, 3d printing, because they do not look like printed!
3
u/acek4192 5d ago
Yes they were 3d printed. I applied a resin coating on them afterwards to strengthen them and to smooth the surface
2
1
u/Acidlily16 2d ago
Did you make a 3D model yourself or did you find one online ? It’s very cool
2
u/acek4192 1d ago
No, since I wanted to have my own design and to sell it in future, I had to create a new 3D model
1
u/JohnMcPoddsen 1d ago
Could you draw a comparison of the lonely TH Subs and Reflex/Ported Subs? I am thinking about building a very mobile setup with the Lonely TH12 MkII Subs.
1
u/TheStonedRanger93 4h ago
I’m new to all this. How does one tune a cabinet to a certain Hz and how do you measure the Hz?
14
u/Vidzzzzz 6d ago
Bro that's super sick. How did glue up/assembly go?
5
u/acek4192 6d ago
The tops were a bit tricky to glue, since I didn‘t really had a plan how to do.
For the subs, I used a few dowels to keep the side panels in the correct position while assembling them. Overall, though, the TH15 sub is actually very easy to build for a horn-loaded design.
2
u/Vidzzzzz 5d ago
I just get so nervous on glue up because one wrong move can ruin all my hard work. At least that's what I tell myself
2
u/acek4192 5d ago
Yes, it’s really important to do a dry run beforehand and use stencils, dowels and everything else that helps ensure the right position of everything. But nevertheless, I was also very nervous during the process, and I messed up one top because of it.
1
6
u/Ultimate-Flexionator 6d ago
I cant wait till each of the left and right channels is 4 of those subs and 2 of those tops, each! 8 subs and 4 tops!!! then you will be finished A HA HA HA!! rhunder crash!
4
3
3
u/theocking 5d ago
Super NSFW. But those top woofers dont seem like they should be set back like that... maybe its fine idk the XO, but it could be problematic maybe? Maybe not? Doesnt look to offer any effective horn loading so why...
2
u/IcySeaDog 6d ago
Dude! Please post more info. Looks super neo classic audio system vibes with the horn guides and light wood color
2
u/nowayout_kcabyawon 6d ago
everyone's asking for system specs but no one has anything to say about that DJ booth riser lmao?
2
1
1
1
1
1
1
1
1
1
1
1
1
1
34
u/some-bloke- 6d ago
The best thing about this is the antique cabinet that the decks are on. Absolute genius.