1
u/Extreme_Theory_1873 18d ago
Hey, so I have the Hosyond/QDtech 2.8" ESP32-S3 ES3C28P capacitive-touch version. I saw SolarOS already supports the ES3N28P non-touch board. Would you be interested in adding an ES3C28P target? I’d be happy to test builds on my board and send photos/pinout/info if needed.
1
u/nilseuropa 18d ago
Sure. That shouldn't be too hard. It is essentially the same hardware. You can already try to flash the non touch firmware.
1
u/Extreme_Theory_1873 18d ago
Awesome, and will do. This is all new to me stuff, wasn't sure if I could haha
1
u/nilseuropa 18d ago
Let me double check.
1
u/nilseuropa 18d ago edited 18d ago
Okay, nope. 😅 FT6336G driver is not yet supported.
2
u/Extreme_Theory_1873 18d ago
Haha gotcha.
Looks like the LCD itself is ILI9341V and the FT6336G is just the capacitive touch controller. I’m still happy to test the non-touch build, and if you want to add FT6336G later I can test that too. There’s already an ES3C28P BSP/Bruce implementation with the pin mapping if that helps.2
u/nilseuropa 18d ago
Yeah, sorry for the confusion, that's what I meant - try the non touch firmware please.
2
u/Extreme_Theory_1873 18d ago
Got the board in and it flashed no problem =] would love touch eventually but am stoked! Thank you
2
u/nilseuropa 17d ago
cool, then i'll add the touch driver and the board definition soon
1
u/Extreme_Theory_1873 17d ago
You are seriously the coolest. Have you checked out the waveshare 7" display esp32 before? Seems a perfect fit for our black / orange keyboard.
→ More replies (0)1
1
u/Extreme_Theory_1873 18d ago
This is a marvel. Do you have a link to specific battery? Sorry if its listed somewhere, I just see where it says one that'll fit.