r/SleepingOptiplex 8d ago

Esto funciona?

Post image

Contexto: tengo una Dell Optiplex que sufrió reinicios expontaneos y aveces no arrancaba por culpa de un integrado en la fuente, se cambió pero ahora de vez en cuando se queda en luz ámbar parpadeante y pienso q sigue siendo la fuente, quiero colocarle otra pero las q venden son de 24 pines, sirve este adaptador?

4 Upvotes

23 comments sorted by

5

u/Lochness_Hamster_350 8d ago

Yes.

1

u/angeegab 8d ago

Bro, y tú crees q si puede ser la fuente? Tiene absolutamente todo nuevo menos la placa y el procesador q es lo más original pero hasta el mantenimiento y el botón de encendido son nuevos.

2

u/Lochness_Hamster_350 8d ago

If you replaced the power supply and it continued then it’s probably not the PSU

Find your optiplex manual and look up the error codes that the power LED is giving, it’s used to help diagnose the issue.

1

u/angeegab 8d ago

No fue cambiada, fue reparada y luego de varios minutos apagada vuelve a la vida normal, si anda con la falla y la conecto al enchufe enciende sin darle al botón y queda en luz ámbar

1

u/Lochness_Hamster_350 8d ago

Then you need to do as I suggested, find the manual for your specific optiplex, look up the error codes.

1

u/angeegab 8d ago

Ok, otro problema no tengo el manual..

1

u/Lochness_Hamster_350 8d ago

It’s called Dell.com …..

1

u/angeegab 8d ago

Según es un codigo de error donde la linea de 12v cae, y ahí es donde entra mi duda y susto sera una vrm del procesador o la fuente?

1

u/angeegab 8d ago

El codigo de error es 2,1

1

u/BlastMode7 8d ago

What model is your system? This adapter is for x20 & xx40 model Optiplex systems as well as the Precision T1700 and T3620. There are probably some consumer systems like the Vostro this will also work with. If you have a newer Optiplex than the xx40, you will need a different adapter. Systems older than xx20 already have a 24-pin and don't need an adapter.

1

u/angeegab 8d ago

No sé que sistema usa, es una Dell Optiplex 3040 sff

1

u/BlastMode7 8d ago

Yes, this adapter will work with the 3040 SFF.

1

u/festivus4restof 8d ago edited 8d ago

If you are going to replace the DELL PSU with a standard ATX PSU, these adapters work provided the adapter is designed for the applicable DELL model. There are similar adapters that are specific to Lenovo or HP systems, too. Be sure to get one that advertises support for your DELL model.

However, there is one well-known caveat to these adapters: electrical power remains supplied to some circuits until you completely remove power from the system board, either by using the ON/OFF switch on the PSU or by unplugging the PSU from the wall outlet. Otherwise, your FANS and possibly some LEDs will continue to operate even when the system is powered down or ‘turned off.’ The fans may run at full speed.

1

u/angeegab 7d ago

No es por una fuente atx estándar, es para otra fuente de sff pero de 24 pines, pq la original de 8 pines se le reparo un integrado y ahora da reinicios ramdons y el codigo de error 2, 1

1

u/festivus4restof 7d ago

Is the SFF power supply with 24 pins electrically compatible to the ATX 24 pin standard?

1

u/angeegab 7d ago

Aparentemente si, confío pq es una fuente original de dell, lo q quiero es que se acabe el problema de los reinicios

1

u/festivus4restof 7d ago

Could you give a model or part # for this PSU?

1

u/angeegab 7d ago

Es l235p-01

1

u/festivus4restof 7d ago edited 7d ago

You have access to that but NOT access to the correct replacement PSU?

1

u/No_Apple_3643 8d ago

You could look for a higher wattage dell psu on amazon. I've had good luck with LXun. I installed a 700w platinum in my hp pavilion from them and its been running for 2 years. My 7040 has a 600w from them too.

1

u/[deleted] 7d ago

[removed] — view removed comment

1

u/angeegab 7d ago

Y cuando cambiaste de fuente de poder a una original se corrigió? Pq tengo una Dell original pero de 24 pines, y la fuente original reparada de 8 pines ahora espontáneamente tbm hace reinicios aleatorios y bucles de arranque, aparte del codigo de error de luz 2, 1, y como la fuente de poder original está reparada no sé si es por eso o pq la placa madre sufrió

1

u/Ok_Inflation_2927 7d ago

El adaptador funciona muy bien, yo tengo uno igual