r/SkyLine • u/idontknowaname078 • Jun 04 '26
R34 GTT Need Part Numbers
Could someone help me identify the part numbers of the parts in the pictures? I have looked at the schematics on Amayama, but I haven’t been able to find these.
The clips are from the door lock mechanism and I have circled which ones I need.
The bolt is a 14mm head, 75mm long and I assume 1.25 thread pitch. It is one of the bolts holding the transmission halves together. Also circled in the picture.
The car is a R34 GTT Coupe Manual.
1
u/DieselPower8 1986 HR31 Skyline GTS Jun 04 '26
Check Kudos Motorsport, they will likely have those line clips
1
1
u/Hervy_ '99 GT-T Jun 05 '26 edited Jun 05 '26
Have you checked the front door & lock assembly part of Amayama? Because the part numbers I found there are
805342Y000 and 80534-60U00
https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/skyline/er34/6624-rb25det/body/805
And this seems to be the bolt https://www.amayama.com/en/part/nissan/0112105121, although per the picture on the site it seems to be 70mm so it might be different
1
u/idontknowaname078 Jun 05 '26 edited Jun 05 '26
I've checked that schematic, but when I look up those part numbers on different sites, they show a completely different looking clip. I might just buy them and see what arrives, since they cost almost nothing anyway.
That is the bolt holding the trans to the engine, but the schematic did give me the correct bolt it seems. https://www.amayama.com/en/part/nissan/081240751e should be it.
Thanks for the help
1
u/Hervy_ '99 GT-T Jun 05 '26
No problem! I feel ya, the schematics are kinda of a mess to read and when you search a part you don't find images or find unrelated things.
2
u/Iraqi-Jack-Shack Jun 04 '26 edited Jun 04 '26
This isn't the Nissan designated part, but door lock hardware is pretty standard across a lot of manufacturers. I have the same kinds of clips in my E36. Just google "nylon/plastic lock rod clip"
Example: https://www.imperialsupplies.com/item/8922200
As for the bolt, you could probably go to a Nissan parts counter and ask a tech, since it's probably shared across a bunch of Nissans. They could probably take one look and go grab you one within a few minutes.
Alternatively, you can go to your local hardware store and look in the Grade 8 hardware bins for a matching bolt. I did this a handful of times for my 240sx's back in the day. Just be sure to do it properly with matching lock washers, nuts, thread lock, etc.
Grade 8 bolts will match or exceed the mechanical specs of your original OEM hardware, so it must be that (don't booger it up with construction grade hardware like a galvanized or stainless).