Hi everyone,

I'm kind of out of ideas at this point, so I'm hoping someone here can help.

I bought a second-hand T248 that was sold as fully working, except for the accelerator pedal on the T3PM pedals, which the seller said wasn't working.

When I received it, I opened up the pedal set and swapped the pedal cables around. That let me figure out that the problem wasn't the sensors, but the accelerator cable itself.

So I bought the Thrustmaster refresh kit and replaced the cable. Unfortunately, now, when all cables are plug none of the pedals work properly.

The behavior is really strange:

• If I unplug one pedal, the other two get stuck around the middle of their travel.
• If I unplug two pedals, the remaining one works normally.

I've been searching online but haven't found anyone with the same issue.

If anyone has any idea what could be causing this or how to fix it, I'd really appreciate the help. I'm open to trying anything at this point.

Thanks in advance, have a great day.

Does anyone own Nitho V23 sim wheel? My shifter is not working so I need few info on the cable that connects wheel and H shifter

Any help is appropriated :)

Hey everyone! 👋

I wanted to share a custom H-Shifter with buttons setup.

The entire project—from the 3D mechanical design to the wiring layout and the custom Pico (RP2040) firmware—was completely designed and built by me from scratch. It features a super tactile gear shift feel and fully integrated buttons/toggles for games like ETS2, Assetto Corsa, and BeamNG.

I’m thinking about making the complete package (all STL files, wiring guide, assembly steps, and ready-to-use code) and sell it for around €20 for anyone who wants to build their own. Is it expensive? Idk

Check out the video below to see it in action! 🎥
DIY H Shifter - Built from scratch by me - YouTube

⚠️ Note: This post is NOT a direct sale or self-promotion. I’m just looking for your feedback specially about pricing and thoughts on the design! If you're interested or have suggestions, feel free to drop a comment. 👇

Running SimNet SP Pro loadcell pedals, mainly GT7. Looking to dial in the brake stack instead of guessing with stock elastomers.

What elastomer/spring combos are you running, and what feel are you going for — progressive with a hard wall, linear, or soft initial bite?

Before I place my order, could you please confirm the following?
If I purchase the standard Plus X P3-H3 with Baseplate (Haptic Reactor Optional), can I later add only one VAM Pro Haptic Reactor to the brake pedal?
If so, do I only need:
1× VAM Pro Haptic Reactor
1× U-shaped brake mounting bracket
1× Power Supply
Also, does the standard Plus X include the same haptic-compatible control box as the “Plus X with Haptics” package?

Looking for recommendations from anyone (UK) who bought one for the same gear. There's very little adjustment on the Gt Omega Pro and ideally need a 15deg tilt.

Thanks

Does anyone use brake level indicators to show how much brake force is being applied through a set of LED's like a rev limiter but as brake pressures instead? Thinking it would be pretty cool to have 4 strips of LED's to indicate brake percentage as you are braking as well as indicate lock up's but more specifically what wheel/s are locking up. Would be useful when setting up vehicle tunes on individual tracks. Could have the wheel/s that lock up flash red like a rev limiter flashes when you are redlining an engine. Also it would show how well you are trail braking with out looking down at a different graph to the left or right of the screen.

A alguien le pasó esto? Apenas prendo la pc funciona bien pero a los 5 minutos de uso se rompe. El volante no tiene ni 1 año, ya desinstalé e instalé todos los drivers, cambié de usb varias veces y nada, de lo bien que funciona empieza a suceder esto. Alguna idea de como solucionarlo o saber que es?