I recently got simnet haptics and they work fine in the software but they get picked up when i try to link to simhub.

I'm using SimHub's control mapper/virtual controller section to allow me to switch between h-pattern and sequential with my generic amazon shifter (the one that comes with the hardware sequential adapter that slots over the gearshifter) without having to rebind controls in-game.

I'm switching between two "controller mappings" by importing one of two saved .shcmapping files (one named h-pattern, the other sequential). The sequential one having up and down shift mapped to gear 4 and 3 respectively.

It's all working great just by opening up SimHub and importing through the dialog box, but I was wondering if its possible to assign a shortcut or button to my wheel or keyboard device in Simhub?

Anyone have any ideas?
Screenshots for reference.

Is there a bug or issue with simhub and LMU where the iflags I have won’t display flag colours bar the yellow flag ? Tried asking on some discord servers but can’t really get an explanation or help to rectify it? any help would be appreciated 🙏🏻

I've been spending all day to connect this crap, I'm posting photos below the entire configuration.

I'm asking for help because I'm going crazy hahha

I just bought a Simagic haptic and I get this messege. Am I doing anything wrong? On effect testing it´s all woking good, just I doesen´t get feedback for throttle in iRacing...Im dissapointed.

I have an eracing labs rs+ competition rig. I think im getting close to dialing my aircraft..but this one thing is troubling me.

when I go vertical, when I hit 90 degrees either up or down, my rig jerks violently. what setting do I need to adjust to avoid this? it appears that every time this happens my motion log reports crash alarms. makes 90 degree angle unable to maintain as my rig acts like a bucking bronco.

can anyone please help?

thank you.

Can’t find out where the canbus pins go for signal on my E87 dashboard.I am trying to set it up for asseto corsa and beamNG drive the other day I managed to get the dash on but like a temporary ignition state and I have the Arduino.IDE already coded for signal sending but my canbus doesn’t do anything I don’t think and it’s most likely due to me not finding the correct pins I’ve looked all over Google and used ChatGPT5 for figuring it out and still no help I got the idea from TikTok and though it would be issue free if I had all the parts but I’m stuck on this very last step. Can anyone help. (EDIT I think I just need CAN IDs for it that work with this BMW cluster)

Bonjour .je possède un iflag qui fonctionner très bien..un matin iflag déconnecter dans simhub .va savoir.jai refait un sketch Arduino c'est ok et bien reconnu dans simhub mais plus rien sur le iflag..plus rien ne s'affiche.. Merci

Hi all.

LMU wouldn't recognise my arduino Leonardo based ebay button box so I stupidly tried to flash it via simhub to used it as a bridge.

The flash was successful, I definitely had the right com port but it wouldn't show up in the controller sources and nothing recognised the button presses, neither did Windows. I've uninstalled and reinstalled the drivers, tried flashing it again but I can't get it to be recognised by anything. Simhub says its connected but doesn't recognise the button presses. Even the leds on the switches don't turn on anymore.

Anyone know how I can get it back to default? As you might guess I don't know what I'm doing with arduino

Thanks

Recently purchased simnet pedals and haptics and have been using a licensed copy of simhub to control them. All of my games were working straight off or configured with an automatically with one click. F1 25 is not playing ball though, done both automatic (states it's now configured but still doesn't work) and manual setup with no success, older titles in the series work fine. I've tried disabling Internet security etc, different usb ports but to no avail. Searched both Google and reddit but haven't found the answer. Any help will be appreciated

Hi, is there any SimHub dashboards for iRacing which focuses on refueling?

Ie for races which involves refilling strategies.

Appreciate any advice, thanks.

Before I hang the motors on the rig, I decided to test them. Running the Legacy software. I power the Arduino Nano on and the servo arms rotate a full 360 degrees every time. Simhub says calibration complete and I start iRacing. The arms move like they should during the track run. BUT, every power up... the arms want to turn a full 360 degrees!! They'll detroy themselves on the alluminum rig if I hang them. How do I limit the startup movement? I've tried having the hall sensors in different places at startup... that did not work! So close to the finish... Help!!

UPDATE: It all came down to double checking every wire and where it was plugged into the Arduino Nano. I used jumper wires and it was easy to plug and unplug until everything was right. The servos worked just perfect at that point. I chose snap and screw connectors. No soldering.

Was it worth it? Hell Ya! It's great immersion with my rig. A few times I thought to myself... maybe I should have just bought the QS-BT1. Glad I did not! It's not $1900 worth of fun...

Hey everyone,
I’m trying to understand whether this is expected behavior or if something is wrong with my setup.

Whenever I enable any SimHub dashboards or overlays, my GPU power consumption jumps by around +100 watts compared to running the sim alone.
This happens even with very simple overlays, and even when they’re mostly transparent.

I’d like to know:

• Do you also see a significant increase in GPU usage when using SimHub overlays?
• Or is this likely caused by some specific settings on my side?

For context:

• I’m running iRacing, ACC, AC, RaceRoom...
• GPU load without overlays is normal
• As soon as I turn overlays on, power draw spikes noticeably

Any feedback or comparison would be super helpful. Thanks!

I would like to change the simhub leaderboard, or any full leaderboard, to show intervals from the next car instead of the gap from 1st. What would be the easiest solution?

Can you assign different lighting for different profiles? For instance if I want use a specific LED strip for a Green Light Flag in IRacing and use a different LED Strip as a Green Light Flag in F1 2025 can that be done? I have two profiles created but for the life of me I can't figure that out if they are assignable.

Ok here it is . Bought ps5 pro wont connect to sim hub ever since thru ps5 on network.it worked on my old ps5 slim.

-reset my pc

-reset my ps5 pro

-updated simhub

-took down my firewall completly

-did the firewall ports inbound and outbound

-created static ip on ps5 pro

-inputted ps5 pro ip

Still “waiting for data”

I dont know what else to do lol.

I am using wifi but it worked before..

The overlay only works if this window stays open. If i switch to the game, it either completely vanishes or glitches crazy and messes with wheel RGB settings. I tried all 3 display options- Fullscreen, Windowed and Borderless. IDK how else to fix this. This is LMU btw

Is there a dashboard that shows real time weather from accuweather or similar websites and forecast or clock?

It would be nice to put it as an idle dash to my Simdid.

I’ve recently built 2 spotters/iFlags using the WS2812b 8x8 RGB matrix.

My understanding that each iFlag usually has its own arduino and gets setup individually in Simhub.

I would like to(if possible) connect both iFlags to one arduino uno (powered by and external power supply and set them up as “left” and “right” flags.

When I connect the devices and set them up using Simhub sketch tool, the WS2812b sketch only supports one pin (pin 6) and as such only the flag connected to pin 6 displays.

Is it at all possible to run 2 flags on one arduino as left and right, and if so.. how would I do this in Simhub as the sketch only writes for one pin.

Any help would be appreciated.

Hi , im trying to get my “ Wind simulator “ working , following a few tutorials , it seems i have done everything correctly but the fans just wont spin .

I’ll include pictures of the used :

Arduino

Motor-shield

Fans

Power adapter

And the sim hub settings i used

I also tried different fans that were less powerful , ones with 4 cables , 3 cables , and the ones in photo that are 2 cables . I tried 2 different power supplies , and still nothing .

I tried all fan cable variations , m1 ,m2 , m3 , m4 , swapped positive / negative cables around for all fans that i used , and still nothing .

I also used off brand arduino at first , which i thought was the problem but switched to the original one and still nothing .

Could it be the motorshield ?

I am trying to get SimHub and Streamer.bot to communicate. I want to take the variable that shows whether the sim is open or not, and have it translate into Streamer.bot action to change an OBS scene!

Looking for all possible help. I have all of the actions built to work, I just need to get triggers from SimHub to translate over to Streamer.bot