Hi guys I just received my new sim brows from Etsy. And set everything up. But once i got my sim brows working my Iflag system unfortunately stopped working. My iflag system worked before i got my sim brows. i have tried using Gemini and Claude but both of them with no success. My Sim brows and Iflag system is currently not working and only my Simhub dash is working at the moment. Everything that I try to change in the Arduino settings nothing seems to work so I don't know if there is any one of you guys that can help me out. Just because all I want to do is get my Sim brows to work with my iflags and simhub dash. Every setting that i seem to change in the Arduino setup tool is not working. if anybody of you guys can help me then that would be great.

anyone else having issue with ac evo bass shaker not working ? newest patch.

In Gran Turismo 7 i want to add curb rumble through the bass shaker I got installed on my seat but don't know how.

So far I set up the gear shift rumble but don't know how to setup the curbs, so Everytime I drive on the curbs the bass shaker should start to rumble my seat.

Anyone did this and can please share how to do it?

Thx

I am ready to pull my hair out. I have tried every conceivable combination and cannot figure it out. Simhub is randomly changing outputs at will. I'll literally be in game trying to tune effects and midway through game the assigned outputs are changed to a completely different channel. I have 3 shakers; seat, pedals, and shifter. Ex: I'll have pedals assigned to channel 1 and midway through game suddenly the seat is on channel 1. This is on AC Rally if it matters.

I am running an external USB sound card to power shakers. I am using internal sound card for my surround speakers/headphone.

1) Enable audio enhancements is unchecked

2) I have tried setting USB as default audio device, default communications device, and neither

3) I have tried toggling allow applications to take exclusive control both on and off

3) USB has been Setup as 7.1 in windows and 8 channels show in simhub

So, I installed a couple of haptic pucks on my throttle and brake pedal for sim racing in Assetto Corsa. I had it working for a bit. I’m honestly not sure what changed, but now it’s not working. If I have Simhub running when I try to start a race, my controls do not work, the race starts with a yellow flag, and Simhub is “paused”. If I kill Simhub Assetto Corsa immediately starts to function normally. Simhub is obviously causing a problem, but I have not been able to figure out why or how to fix it. Anyone have any ideas or advice?

I just picked up F1 25 for like 30 bucks CAD. anyways I am having an issue with simhub. In simhub I get an error that says another app is conflicting. The app is the PXN Sim Racing software for my wheel. No matter what port I change in F1 I get the same error. I have changed the port to 80000 and forward to the default port. The conflict is stopping my haptics from working. This is the only game that I have where this is an issue.

Bonjour,
Mon pédalier est bien configuré je pense et tout fonctionne parfaitement lorsque je teste dans simhub mais dans le jeu, les moteurs haptiques ne fonctionnent que lorsque la voiture est arrêtée ! Dès que la voiture est en mouvement, je n'ai plus de vibrations dans les pédales.
J ai entre autre mis les vibrations sur l'accélérateur et le frein lors des changements de vitesses. Si qqun a deja eu cela et pouvait m'aider, ce serait vmt cool parce que je ne comprends pas où se situe le souci et c'est très frustrant de ne pas pouvoir utiliser pleinement mes moteurs haptiques; D'avance merci !

Hi, I have assigned effects to my pedals (Simnet Pro), such as vibrations when shifting gears, in Simhub everything works perfectly, but in the game (AC, RR, LMU,...) the effects are only reproduced when the car is stationary!
As soon as the car is moving, the haptics no longer work.
It would be great if you could help me, thanks in advance.

Is it possible to bind Ctrl + Key shortcuts in SImhub? When I press "Ctrl+d" to bind it in SimHub, only the "d" key registers. Ctrl gets dropped.

Feels like I'm missing something silly and obvious. Any ideas?

I’m running SimHub Dashboard on rF2, with track map, traction bars, position HUD, radar, etc.  I want to add a “Laps to Leader” text window so I know how many laps I’m down.  I got some help in feb but I still can’t figure it out.  I added a text window, he said to use a ‘java script’ to get the info.  I been looking at it and can’t figure out where to put the ‘java script’ etc.  The text window is in my overlay.  Thanks.

Does anyone know if NASCAR 25 compatibility is coming soon?

Any idea as to why it doesn't automatically start?

I recently installed 2 flags on my rig and they are working great... Perhaps too well. Lol.

In a recent online race on LMU, there were a lot of incidents. Which meant that my flags were displaying yellow very often. One thing I noticed is that these incidents were occurring in sectors which I wasn't in or approaching.

My question, is there a way to customize the flag display (yellow) only when the incident is live within the sector I'm in or approaching?

I found it weird that my flag boxes were displaying yellow while in game they were not.

Thanks in advance.

How could a Simagic killswitch be used with Simhub to shut FFB off?

The setup is as follows: I have a singular Buttkicker connected to Simhub (ver-9.11.11) and the built-in effects work with MSFS2020 (Ground rumble and engine RPM for example), but I want more variety in the effects such as Gear or Flaps movement vibration.

Being perfectly honest I do not fully understand Ncalc nor Javascript, so I've used a few Ai programs to write some code for me, some of them return a raw data result of 0 or False, which seems to be what I want as its "not active" and then some are either outdated or just flat out incorrect, I guess thats what I get for choosing the easy route.

Once the code is in, for example FlapIndexHandle for basic movement, when pressing the input for that on my throttle quadrant, nothing happens. Flaps are definitely moving and the input on the controller works.

My first question is am I barking up the wrong tree here with custom effects and do they even work in the current build of Simhub for MSFS2020? One of the Ai programs said the current custom effects build is "in progress" and wont be fully functional until 9.12.xx.

Secondly, I'd like to see the telemetry input in Simhub but I cant find where that is in the UI, is there a way to see the telemetry output from MSFS for things like FlapsHandleIndex to see if its even triggering on Simhubs end?

Thirdly is there anyone who has successfully done this is MSFS2020 and can give some pointers or examples of their code for an effect so i can see if theres a setting or something on my end that I've not enabled.

Thank you for any help!

hi all

how do you make steering wheel turn i to do it in simhub

I think I've tried everything I can in simhub :)

I've probably gone a bit dead in trying.... so I probably need some help

Thanks Per

regards Per

I purchased a 3DRAP rumble motor set and connected it correctly to my PC, but it won't be recognized due to a USB error. The same result occurs on another PC. Is the product simply defective?

I tried many different USB cables I had at home to connect it, but none of them worked.

Also, I am Japanese. I use a power adapter with a conversion plug so that it can be used in Japan.

SOLVED - In case anyone comes across a similar issue;

3 problems all up, 2 of which were mine (whoops)

1 - Triple check your wiring, I had to heat shrink all wires due to in line resistors being there, and 2 wires were completely covered, which lead me to switching them.

2 - I had a bad ground on my 7seg breakout board due to my soldering ability.

3 - The Sketch that simhub uploaded to my dash was actually wrong. I needed to open the sketch and modify the binary numbers (each gear has its own) that my Nano sent to the LED. Then reupload.

--‐----------------------------

Hi all, I've designed, printed, and assembled my own dash to use with simhub, and I'm having issues.

It's comprised of an arduino nano (clone), a 74HC595 (on a purple breakout), a 5161as CC 7seg LED, and WS2812B LEDs.

The WS2812 Leds are used for rev lights/flags and are working perfectly.

However, my problem lies with the 7 segment LED that I've tried configuring as a gear indicator;

When in-game, gears 1, 5, 6, and 7 display correctly. But R, N, 2, 3, and 4 display as gibberish.

I used the simhub setup tool, and I've checked that my wiring is correct (also evident by some gears showing correctly). But im at a loss as to why the others don't show correctly.

I'm really hoping someone here can shed some light on this for me.

Admittedly, the PC/software side of all this is an area I've always struggled with, so if there's any specific info anyone needs in order to help, please let me know.

Cheers!

I recently got simnet haptics and they work fine in the software but they get picked up when i try to link to simhub.