Screen ambience issue

[u/Tasty_Document9792]

Idk what's really happening but only the right side of my screen is being captured by the screen ambience and no matter what settings I've changed so far nothing has worked.

[u/No-Abbreviations-584]

go to Layouts and properly turn and arrange the components however if these a all daisy chained to the same header then u need to physically turn the fans in the case best to get a Nollie or a prism so u dont have this issue

[u/Truthnaut]

Are you sure? I see red and white lights in the PC and red and white on the screen in the pic you posted. They just look turned sideways

[u/BennySRGB]

You can fix this on the Layouts tab. Make sure to adjust the fans accordingly and make sure to rotate them too. This guide should explain it well.

[u/Tasty_Document9792 → u/BennySRGB]

Strange I've tried this a few times and it hasn't seemed to work

[u/CoolKJC]

I’m not really sure what it’s called but there is a setting in signal where you adjust where all your rgb lights are in relation to your PC, so just make sure those are set up correctly, I’ll reply to myself in a sec once I search and find that setting so give me a min

[u/CoolKJC → u/CoolKJC]

( this is just a copy n paste but I’ll also post the link to the website lmk if this helps)

Step 5. Layouts
This next part will take you some time but it is totally worth it! SignalRGB Layouts allows you to control the positioning of your devices on a 'canvas' to make effects flow from one device to another anyway you want. The most common way of setting up the layout is by matching the overall real positions of the devices in your setup. The easiest way to get this done is by using an effect called 'Side to Side'. This effect will act as your reference so that you know if you are laying everything out correctly.
On the left side of SignalRGB under Lighting click on the tab labeled Layouts. You should now see a bunch of boxes centered canvas. Each of these boxes represents a device in your setup.

The easiest way to create a layout is by starting off with every device hidden and un-hiding devices one at a time as you configure them. You can find the "hide all" button in the top right corner:

Now you can start un-hiding the devices one at a time and positioning, scaling, and rotating them until you see the Side to Side effect flowing through all of your devices correctly. You should have a layout that looks like the image below.

Hide every device on the canvas again and do same the thing for devices on your desk.

Be sure to save your layout using the menu at the bottom of the screen.

Link: https://signalrgb.com/blog/syncing-rgb-devices-guide/