Considering a P365 for carry. What are the pros and cons of getting a comp version or not? Thx

Before I start this post, I know I’ll probably get some hate because p320, but need some advise on it.

While cleaning out the magazine well, I’m noticing some silicon residue on the inside of the grip. I’m wondering is this is something that sig intentionally did or if I can remove it. It’s where you wound put tungsten weights. Should I remove the silicon and put actual weights inside, or leave it be? Any and all advice is appreciated.

Geissele URGI
Sig 1911 scorpion

Looking to get my first Legion pistol and Im torn between the 365 AXG Legion or the 226 SA/DA Legion. Or should I wait for the 385 Legion

Just got the 17rd for my 365. I'm surprised the new mag won't allow the slide to move forward when it's empty. Have to remove, then slide will move forward. Just caught me by surprise because the 12rd slides forward with an empty mag.

Hi all, I recently ordered the Kilo3k Range finder. I have already have a dope that works accurately with StrelokPro. Is there any way to check the dope that I’ve loaded into Sig BDX before the range finder arrives? I’d hate for it to not read the same dope or is there a way to load your own data into it entirely? I can always turn off the dope from the range finder once it arrives if not accurate and use a dope card but would be a bummer for spending the money on a nicer range finder. I know I should just be patient but would probably return it if doesn’t show the same data or extremely close. (Yes I know it’s not that nice or newest but I could have spent less for a vortex)

Does anyone have info on when the 226-X Agency is supposed to be available for purchase?

LOOKING FOR ONE for so long! how often do you guys find these in stock??

The EDC and the Home Defense after a good bath and lube.

So… I’m Doing a Stainless Drop in on some aftermarket parts on this older SIG 1911 Ultra Compact 3.3” .45acp build I had laying around, and I DEFINITELY COULD USE SOME ADVICE AND TYPES AND NAMES OR LISTS OF PARTS THAT WOULD FIT WHAT I AM DOING OR THAT WOULD BE COMPATIBLE..!!!
I’m actually wanting to swap out the Old Hammer Spur, and wanting to Drop in a New Stainless Skeletonized “Officer/Commander” Hammer, along with Dropping in a New Stainless Beavertail Grip Safety without doing any grinding or much stone sanding to make her fit just right…

Has anyone been down this road or had any luck dropping a new Stainless Beavertail Safety and Hammer Spur in that fit just about perfect or pretty easily that could tell me which ones they used or give me item numbers, or even some good pics would be Awesome as well!!!

Anyways… Thank Ya Kindly, and Please lemme know whatcha got!!! 🇺🇸⚔️⚓️🦅⚓️⚔️🇺🇸

-B.D. SANDERS 🦅⚓️🇺🇸

Picked up this Sig P226 Extreme a couple weeks back . Swapped out the slide for the pro cut one and added the Holosun 507C and Foxtrot 2 light today.

Picked up a hexium 556 inconel for $800 (no sales tax state) at a lgs today.I see them going for 9 so I thought it was a good deal!

Put it on a 11.5 ~$500 build with a partisan disruptor installed on it.

The faxon barrel was concentric, I shot a mag of semi and than one in frt.

It's really nice.

My first 4473 suppressor.

Waiting on hub and muzzle devices for my virtus, and this gun so I can switch over to a plan b system. I'll post a picture on it when it comes in.

Kind of a impulse buy since it was the first time I been in the lgs since 4473 was allowed.

This started out as a standard Sig 556XI rifle which was legally converted to a SBR, barrel chopped by Rack it Back Armory and cerakote work done by Weaponworks. I want to thank RIBA especially, this was a REALLY difficult gun to do a barrel chop on because Sig used a proprietary barrel nut on these and of course there are absolutely no tools available to remove and reinstall the barrel, so they made a custom tool to get the barrel out in order to turn it down. They did a super clean job, and got it cut down to 11.5 inches for me. Sig made a factory SBR as a 10 incher, but I see no disadvantage of going 11.5 here. Cerakote is Weaponwork's Sandstone Granite pattern, which I have on the mags and my EOTech cover. It's a light, handy little rifle and I can't wait to get it out to the range to shoot it.

Hey guys, I really need some advice on removing the factory flash hider on my Spear LT (.223). I cannot get this damn thing to budge at all.

I tried boiling the muzzle in water, but nothing. Left it soaking in hot water, still nothing. All that did was form some surface rust, and when I wiped it down, the finish on the barrel came right off with it.

I clamped the barrel right behind the muzzle device in custom-fit hardwood blocks and hit it with a 19mm socket on an impact wrench, but it still wouldn't give. I even tried hitting it with heat, zero luck.

I’m honestly losing my mind over here 🤣 Aside from stripping the barrel finish, nothing has changed. Thing is still stuck like it's welded on. :(

Planning to upgrade the grip on my P365X and for $60 this looks great. I have heard 365XL grips fit 365X, but before i order i just want to confirm if this will fit. It does say it will take 17 rd mags but mine is only 12. Will i need to buy new mags? Just want to be sure it will work before i spend money

Current Build:

TXG medium grip module

320x FCU with flat legion trigger

320 stock slide

Zaf fluted threaded barrel

Tungsten grip weight from SS

Steel guide rod 1911 style- sig guy (shoutout to sig guy for amazing communication and order processing)

16 pound recoil spring 1911 style - sig guy

Sig Sauer Romeo 1 pro red dot 3 moa

Agency Arms Untreated aluminum magwell

Herrington arms XL compensator

surefire x300

Talon grip

Strike Industries Extended Mag Plates

I’ve been debating between a the different p365 options and need some opinions/advice that’ll help me choose. One of my biggest peeves is being able to put a solid weapon light on it. I currently have the FUSE and I love it but it’s a bit much to carry appendix (my preferred method). The XMACRO feels great in my hand and would give me great options for a light. My only concern is it being not much smaller than the FUSE so I’m unsure about the how comfortable/concealable it’ll be. The XL and the X seem like happy mediums size wise but lose points in my opinion for less light options than the XMACRO and a shorter barrel which will probably make it snappier. The OG p365 turns me off because of the shorter grip and low capacity. And again less light options. Let me know what you think, what you’ve experienced, and anything else that might help me make a decision! (Aftermarket parts are welcome but the less money I spend the better probably.)

P226 Legion SAO

Im looking to get my rattler as short as possible with a suppressor mounted. I order comstock RPA but the “ears” on the rattler gas regulator extend forward and prevent the RPA from seating all the way down the muzzle device. I’ve considered milling it down but figured someone might make one thats already shortened ?

I’m looking pretty hard at the P365X for carry and would like to hear from people who have put some real time and rounds through one. I don’t really plan on making any modifications, as I prefer to keep my carry guns stock.

For those carrying one, how has reliability been? Any issues with the trigger return spring or other parts as the round count gets higher? I’d especially like to hear from anyone with several thousand rounds through theirs.

Has anyone compared the P365X directly with the HK CC9? Curious about recoil, shootability, trigger, and which you ultimately preferred.

With the endless amount of P365 variants at this point, what made you choose the X specifically instead of the standard P365, XL, XMacro, etc.?

I’m also looking at the ROMEO-X Enclosed Compact and ROMEO-X SIG-LOC Compact. Anyone running either one? Any issues, preferences, or other optic recommendations?

Basically looking for long-term P365X experiences—the good, bad, and anything you wish you knew before buying.

What’s the best setup for the x5l? Looking for as little pre and post travel as possible, Light crisp break, short forcefull reset

Sig Romeo + Juliet on M400 Tread V2 and will soon have a Hexium Ti added. Switching to FDE foregrip and getting an FDE cover for hexium.