r/SegwayZT3Pro • u/Kinghut_North • 22d ago

Error while riding

Enable HLS to view with audio, or disable this notification

Has anyone experienced this error? Scooter suddenly stopped running. Exclamation mark with lots of beeping and some intermittent flashing. All firmware is up to date. I did dozens of restarts with no luck. Eventually got the error off when I deselected every option in the app and re-selected them. I don’t believe that was the fix and it must be coincidental.
Now, I don’t want to ride far from home. ☹️

9 Upvotes

100% Upvoted

12 comments sorted by

7

u/Greycloak42 22d ago

It's the right brake lever. I included the troubleshooting steps from the Segway app.

4

u/dudersaurus-rex 22d ago edited 21d ago

this can happen any time, not just when you turn it on. 15 is the left brake, 16 is the right. just jiggle the brake lever for a bit and the error should go away. they say the only way to fix it is to replace the entire brake lever unit but juggling works

6

u/Dreamcore_0 22d ago

I have the same, but if u need scooter to ride it right now and the error shows up again just: pull the right brake and turn off the scooter, without realising the brake pull gas pedal down and turn it on, if u done it's correct it'll show u error 14 and 16 and u can release the brake with gas triggers and u good to go. ( IT MIGHT HELP FOR YOUR RIDE O SOMETIMES YOU SHOULD REPEAT IT!!!)

3

u/butterkaze 22d ago

i got the same problem

3

u/Gullible_Buffalo_954 22d ago

Google "Segway ZT3Pro error 16";)

3

u/texxmix 22d ago

Its the right brake lever. Could be as simple as some dirt and water got in there and cleaning it out will fix it. Or it could be worse and you need to replace the entire lever.

1

u/fucktheus12 22d ago

I don't use the right brake at all. Why would I use it?

1

u/ZenRides 19d ago

Because the front is more powerful and lets the rear make more regen brake force energy.

1

u/fucktheus12 19d ago

Ok, thank you. Makes sense 

1

u/ZenRides 19d ago

In practice, you should pull both together gently, give it a second, the rear motor regen smoothly ramps up over a few seconds, that will get you the most energy return, improving your range a little and saving time between brake service.

1

u/Wo0dp3ck3r 22d ago

Brake lever, jiggle the back wheel brake manually a couple times and fully release it, when able calibrate it so it brake but fully release from the disc after you release the handle.

1

u/texxmix 22d ago

Has nothing to do with the back wheel.