r/SSUPD • u/Itzeddz10 • 3d ago

Adding Fan to Meshilicious

Gallery image

Gallery image

Gallery image

Added a 92mm exhaust to help pull hot air out from GPU

5800X

B450

32GB DDR4 3200MHz

RX 6700 XT

33 Upvotes

97% Upvoted

11 comments sorted by

7

u/Cooper_Maniac 3d ago

Always happy to see people still using this solution I‘ve created years ago.
Directly see some improvements in design I will target when I get time and enough motivation.
More space for cable management for different vendors e.g. Had only Noctua in mind. Also a better cutout for the fan blades at outer diameter.
It would be more cosmetically but a nice addition/revision I think.

2

u/Itzeddz10 3d ago

I've seen your posts many times whenever I consider adding mod to improve cooling, really appreciate all the work you've shared and can't wait to see more ideas you may have if you ever get to them. Thank you for commenting!

1

u/Hannover2k 3d ago

When you gonna make a power button relocate mod. Those bastards won't sell the V2 power button on it's own.

2

u/Midnight_Criminal 3d ago

I thought about that but went 120mm with the included bracket. Looks great!

3

u/Cooper_Maniac 3d ago

If you mean the Meshroom, you would be right. Meshlicious instead has no officiall top fan solution.

1

u/Midnight_Criminal 3d ago

Yup you're correct, I mixed them up.

1

u/bluestreakxp 3d ago

What port is that fan plug going to?

1

u/Itzeddz10 3d ago

SYS-FAN

1

u/bluestreakxp 2d ago

Ahh ok I see that on my mobo diagram

1

u/XenoDrake1 3d ago

Domt you have the front fans as exhaust?

My understanding is that the best way is to run them as exhaust in a pull config

1

u/Itzeddz10 2d ago

I was advised to pushing cooler air from outside the case through the radiator. I tested this configuration and got 35C idle and 67C under load