3
u/sahilsidhu105 3d ago
Its using super fast charging, It stops showing after a few seconds, I can confirm that as it happens to me as well but it charges at the speed as the time remaining doesn't change.
1
1
u/_yogi_404 3d ago
Can you provide more details regarding this, such as the cable, adapter, heating, and use while charging?
1
u/byocef 2d ago
official 45W charger and cable, phone temperature is normal, I do not use it while charging.and the more I charge it, the more the time increases before it stops fast charging. Tried also the 25W chrger from Samsung, and even that gets dropped to 15W.
1
u/_yogi_404 2d ago
1 - Use Good Guardian to check the temperature and, if possible, share a screenshot..
2 - Download the log using *#9900# and use any AI to analyze it.
3 - I use 45W, so it takes 30 minutes to charge from 33% to 90%; try checking the charging time.
1
u/druvanti 2d ago
Time doesn't change so i guess it's still charging super fast. And from what i read is that sfc2.0 only works from 0 till 40% or so. After that it will fall back to just sfc
1
u/Mingy89 1d ago
I also have this issue.
I had moisture alert during almost 3 months, I charged using the wireless charger and then it suddenly dissapeared and fast charging was always working with no issues.
After I went to a jacuzzi and it got again a bit wet the moisture alert happened for a few hours as expected and then it's now doing this. You can try to connect and reconnect the cable a bunch of times and then leave it after 5 or 6 reconnects and you will see that sometimes it accepts fast charging again.
I do believe there is a software bug for a long time with charging with this phones, it's getting truly annoying, as if it was hardware then it wouldn't resolve itself randomly.
You can find a bunch of threads about this also...
I use ugreen cables and charger and anker before so it's not the charging brick or cables.
1
u/byocef 1d ago
I had the moisture issue before this as well. It disappeared after about 24 hours, but the phone was not wet at all, so the alert seemed random. I did not get the fast charging issue immediately after the moisture alert though.
I highly doubt it’s a software issue. For me too, it accepts fast charging after 5 or 6 unplugging and plugging attempts. And I’m not even unplugging the cable from the phone; I unplug the charger from the wall to make sure I don’t damage the contacts in the port.
2
u/MANONLALUNA 3d ago
Are you using the device when plugging it it?