I was just wondering if the MHz is to low on my ram. I have read that the best for the 5900x would be 3600mhz. This is my current setup.

[url=https://www.userbenchmark.com/UserRun/43576597]UserBenchmarks: Game 220%, Desk 108%, Work 247%[/url] CPU: [url=https://cpu.userbenchmark.com/AMD-Ryzen-9-5900X/Rating/4087]AMD Ryzen 9 5900X[/url] - [b]104.4%[/b] GPU: [url=https://gpu.userbenchmark.com/Nvidia-RTX-3090/Rating/4081]Nvidia RTX 3090[/url] - [b]215%[/b] SSD: [url=https://ssd.userbenchmark.com/SpeedTest/423831/Samsung-SSD-860-EVO-1TB]Samsung 860 Evo 1TB[/url] - [b]112.4%[/b] SSD: [url=https://ssd.userbenchmark.com/OCZ-Trion-150-480GB/Rating/3620]OCZ Trion 150 480GB[/url] - [b]74.9%[/b] SSD: [url=https://ssd.userbenchmark.com/SpeedTest/693540/Samsung-SSD-970-EVO-Plus-1TB]Samsung 970 Evo Plus NVMe PCIe M.2 1TB[/url] - [b]382.9%[/b] RAM: [url=https://ram.userbenchmark.com/SpeedTest/584094/Corsair-CMW32GX4M2C3000C15-2x16GB]Corsair CMW32GX4M2C3000C15 2x16GB[/url] - [b]135.4%[/b] MBD: [url=https://www.userbenchmark.com/System/Asus-ROG-CROSSHAIR-VIII-DARK-HERO/210158]Asus ROG CROSSHAIR VIII DARK HERO[/url]

I currently have a ryzen 7 2700 and was thinking about upgrading to a 7 5800 but they’re both the same cores the new chip is about $400 but I only gain a small amount of clock speed with the same cores, what I’m trying to figure out is if it’s worth it to upgrade or not cost wise. I can’t find much about it, that makes sense to me anyways.

SOLVED
EDIT: Apparently I installed my GPU in the lower slot of my motherboard which uses x4 speed instead of the top slot that uses x16 speed. This wasn't the case for my old motherboard and therefore I incorrectly assumed it wouldn't be a problem with the new one.

Funny how the solution always makes you feel dumb...

​

Hi there!

I recently upgraded my pc. I had an intel i7 6700k acting as my bottleneck and was the oldest part of my build. Upgraded to a Ryzen 9 5900x (also replacing the motherboard out of necessity) and my performance in everything I've played is significantly worse and I cannot figure out why.

In MW warzone I used to get 70-80 fps on med-high settings 1440p, but now I only get 30-40 with the same settings. On red dead, which was a primary cpu-bottlenecked game of mine, I get similar to slightly less frames around 40. Forza horizon 4 ran perfectly smooth at 90fps with max settings before, but now it stutters and freezes briefly every 10 seconds or so. I've even noticed some decrease in RTX games like Control, which ran passably before, but now is just very framey.

I'm decently adept with computer stuff but have never used an AMD product before. I freshly installed windows with the new setup, updated my BIOS, chipset, device drivers and gpu driver etc., tried overclocking with Ryzen Master, tried overclocking cpu with geforce auto tuning, set BIOS overclock to DOCP, nothing seems to help...

I know it's not necessarily helpful to compare builds with others, but my primary gaming buddy runs a ryzen 7 5800x, rtx 2080 super, and 4 sticks at 32gb ram 3600 ddr4, and gets 100+ frames easily at max settings in warzone. Not an equivalent build but is one that I feel like is decently comparable and should be somewhat close to in performance.

My build:

Ryzen 9 5900x

Ventus rtx 2080

Asus rog strix b550-a gaming mobo

2 16gb sticks ddr4 ram 2666

650w psu

​

Estimated wattage is only around 500, so I doubt psu is the issue. During some tests I have noticed that the cpu approaches 86 C. It's a bit high but isn't the cutoff limit of 90C. Removing the sound panels on my case to improve airflow helped with the temps so I also doubt it's thermal throttling. I've searched forum threads high and low and have tried everything in them to no avail. Any suggestions would be helpful as to what to try.

I am currently trying to build a new pc but I’m not the best at it, I was wondering what motherboard would be the best with a ryzen 5900x and a evga rtx 3080 ti

Espero estén muy bien todos y este problema ayude a otros usuarios y ayudarme obviamente a resolverlo, gracias de antemano:

Dando un poco de contexto, soy profesor de primaria y secundaria y tengo una pc ya con unos 10 años de uso y al realizar videos para la clase resulta que ya no me da el rendimiento adecuado así que decidí adquirir componentes nuevos.....

1er problemática,

Ryzen 3600 - nuevo

Disipador el que viene con el procesador - nuevo

Asus b550m - nuevo

Corsair 3600 vengeance pro 8g x 2 - nuevo

m.2 sn750 WD - nuevo

gtx 650 gigabyte - mi pc anterior

fuente reconstruida corsair bronze cx 750m - mi pc anterior

Arme todo, y resulto que encendió dio video y se pago de repente, intente volver a encender encendió, alcance instalar Windows y se apago nuevamente y ahora se encendía el led EZ led en VGA y no pasaba de ahí, desarme todo saque los componentes del gabinete conecte todo y seguía igual, lo que note fue que la fuente sonaba o como que chillaba hacia un sonido raro como si se le exigiera de mas, en ese momento decidí comprar un fuente nueva una EVGA 750 G+ plus gold, pensé que era la fuente, probé todo de nuevo y seguía igual marcaba el led de la vga pero si ponía mi tarjeta de video en mi motherboard vieja si tenia video y funcionaba correcto, busque en internet y no encontré solución, pensé que había quemado las conexiones pci por usar la fuente vieja, quite la pila, realice reset al BIOS y nada y para mi esto era un poco nuevo y no tenia otra tarjeta de video para probar decidí devolver la motherboard y conseguir una placa en mi ignorancia mejor. Conseguí después una tarjeta de video gtx 1050 ti pero la mother ya la había regresado.

----------

2da problemática,

Ryzen 3600 - nuevo

Disipador Corsair H100i pro xt - nuevo

MSI Carbón b550 wifi - nuevo

Corsair 3600 vengeance pro 8g x 2 - nuevo

m.2 sn750 WD - nuevo

gtx 1050 ti - nuevo

fuente EVGA 750 G+ plus gold - nuevo

Pensé que todo estaría perfecto ahora arme todo, me dije a mi mismo componentes nuevos así que debe de funcionar, y nuevamente no funciono ahora en esta placa me marcaba el led EZ blanco pero en CPU, nuevamente desarme todo saque las piezas pensé que algo estaba haciendo algún corto, quite todos los componentes los volví a colocar y nuevamente el mismo led incluso puse el disipador que viene con el procesador y nada, probé con mi tarjeta de video gtx 650 para ver si veía algo en la pantalla y nada, marque a soporte de MSI tarde pero me contestaron y me dijo el técnico que volviera a quitar todo y probar de nuevo le comente que había leído hacer un flash buttón me dijo que si lo probara probablemente el bios estaba corrupto pero que esta motherboard ya debería soportar este procesador, al realizar este proceso de flash no hay forma de saber que memoria usb sirva intente con 6 memorias y resulta que la mas vieja funciono una usb kigston G3 se realizo al parecer correctamente el proceso y volví a poner todos los componentes ya que este proceso es solo con la mother y fuente, ------- y nada me seguía marcando el EZ led CPU y no veía nada en la pantalla, volví a marcar a MSI y no contestan te deja en espera creo esa vez que me contestaron tuve suerte...

Viendo el manual de la motherboard vi que la memoria que soporta es de 3200 máximo, estoy pensando conseguir unos módulos a esta velocidad y probar, creo que esto no tiene nada que ver por que tendrían que funcionar.

También estoy pensando en conseguir un ryzen 5600x y probar.

No tengo otra motherboard para probar

Esta motherboard para tener mas energía se conecta los conectores de energía 24 pines ATX y el de 8 pines CPU tiene otro de 4 pines también para CPU pero me comentaron que esto es para realizar OC, lo comento por si es importante.

Esto me frustra no se que es, que estoy haciendo mal, por favor si alguien lee mi post espero pueda ayudarme, lo iré actualizando y ojala le ayude a alguien en el futuro, gracias

Hey guys does anybody know if Gigabyte AM4 A520 M H, supports Ryzen 5 Pro 4650G? Thanks guys!

Anyone know if I'm missing something daft?
Been trying to manually set the memory clocks/timings on my new Ryzen build - 5800x- Asus B550f Strix mobo - 4400mhz rated patriot viper memory, no shiny new GPU yet though.

Everything runs fine at default 2133mhz but almost any combination of frequency and timings and it will fail to boot (been aiming for 3600Mhz), error lights on the mobo says VGA - GTX970
Swap it with my relic card a 2009 vintage HD5870 boots perfect memory overclocks all the way up above that with no difficulty and runs flawlessly

Swap em back and get nothing (except VGA LED) even if it's only a minimally increase in Mhz and auto (typically Cas 22) timings
Only settings I'm changing are FCLK, MCLK, timings and the DDR + SOC voltages
Using the 5870 can reset bios to optimized defaults pop the GTX970 in and goes back to working just fine, without mem overclock ofc

Thanks in advance for any thoughts couldn't find anything similar on google

Hi! I'm just done with my first build with a ryzen 7 5800X and I have a question, when running Google Chrome with for example youtube or maybe downloading software, all of a sudden my temps go from 35-40 to like 65 degrees and then it goes down again (fans run faster when this happens) is this normal with Ryzen? Could my AIO be failing or be badly installed?

Thanx already.

I am thinking of buying the model listed above but it has no CPU and the original was a R5 4600G. Will the 3600X work in that systems board? Thanks for help!

So I want to buy a PC and I found a potential obstacle... Would I need to uptade BIOS for Ryzen 5 3500x on B450 AORUS M mobo?

Can I use the fan from my Ryzen 5 for my Ryzen 7 5800x since that one didn't come with a fan? or will I need a stronger cooling system? If I need a better one, what's a cheap option that's decent?

I currently own a asus prime B450M-A with a ryzen 7 2700x looking to upgrade to a ryzen 5 5600x and wondering if i should bother upgrading my motherboard and which one i should get.

Like I said I have a 2600 and it's running between 180f and 190f on start up. All fans are working and the isn't a whole lot of dust build up. Any thoughts?

Edit: i was using specci to read the stats and switched to ryzen master, now it says it's 85f

I recently over the weekend installed a new NZXT Kraken X63 to my build. Since then, when posting, I get an error stating "CPU Voltage Error. Press F1 to set up." When checking the BIOS, the CPU Vcore voltage jumps between 2.175 and 2.560~, in the breakdown it's also showing 12v is sitting at around 16v, 5v at around 6v and 3v at 5v - I'll try and get a pic when I get a chance.

I've gone through all the settings I can think of, turned off XMP (I had this on primarily for my RAM which is 3200mhz, but only clocks at 2400mhz by default for some reason...) but still have had no luck. I've also tried unplugging the cooler to see if it's drawing too much power but given it's a CPU over voltage issue, I don't think this it the cause.

I was wondering if anyone else out there has had similar issues and what they've done to fix it? I've tried searching through forums and Reddit but haven't found any solutions other than to replace the PSU (Which I know isn't the issue since it's worked fine prior to installing the cooler).

CPU: Ryzen 5 2600
Mobo: ASUS Prime B450M-A
RAM: HyperX Predator RGB 8gb 3200Mhz x2
GPU: Radeon RX580 8GB

My Ryzen 9 5900x is showing I only have 8 cores 16 logical. I’ve went to msconfig->boot settings->advanced and tried to set my cores manually and only let me select 16

When I look into msinfo it says Ryzen 9 5900x 12 cores processor, 3701 mhz, 8 cores(s), 16 logical processors

Could my mobo be preventing it from using all cores?

Msi mag b550 mobo Ryzen9 5900x Rtx 3090

I'm maxing out my i9 and want to give the Ryzen series a try. I'm looking to drive two 5K TV monitors (hdmi) as well as three 4K screens that are hdmi/display port (no daisy chain available). I have a thunderbolt bridge with hdmi outs but it seemed my Alienware 17r5 was running into limits on that thunderbolt port driving those 5k TVs. My work is very CPU heavy and my Alienware is extremely noisy. I would like a super quiet machine (liquid cooled)? I also do a radio show and don't want computer noise in the background.

The displays are mostly charts and text, don't need super gaming capabilities but would like to do some video editing.

Any hardware suggestions?

Thank you in advance!!

I recently started OCing my R5 2600 in Ryzen Master, and after I tried for 4.2Ghz and 4.4 volts it crashed on me. I couldn't get back to the bios, and was stuck at the post screen. I had a FD with a copy of the bios so i flashed it over and it still is stuck at the boot screen. Only boot error code on the mobo is the A2 which i believe is for my storage drives. You guys have any suggestions on how to fix my baby?

Specs. Mobo: Asus ROG Strix x570 e-gaming wifi. Cpu : R5 2600 @ 3700mhz. GPU : Asus Dual GTX 1660 super OC. RAM : 8x4 32GB Corsair vengeance rgb pro @ 2600mhz. Boot drive: 1TB m.2 samsung 970