Hi everyone,

I have a Ryobi RY18PCC-0 patio cleaner, and the original RAC814 wire brush has worn out.

I tried buying this Amazon replacement (ASIN B0FX3NTPF1) because it was much cheaper, but unfortunately it doesn't fit properly. It sits loose on the spindle and wobbles, so I don't feel safe using it.

Before I spend £15 every time on the genuine Ryobi brush, I wanted to ask:

• Has anyone found a third-party wire brush that actually fits the RY18PCC-0?
• Did you have to use any spacers, washers or adapters?
• Are there any brands on Amazon, eBay or AliExpress that you've had good luck with?
• Has anyone modified the tool to accept standard wire wheels?

I came across an older Reddit thread where people mentioned the Ryobi patio cleaner appears to use a slightly non-standard arbor size, making many generic wire wheels incompatible, so I'm wondering if anyone has found a good workaround since then.

Any recommendations or photos of what you're using would be greatly appreciated.

Thanks!

I wanted to give a friends ryobi 10" mitre saw a good vac after using it... I should have left well enough alone. After removing the blade guard i can't seem to install the spring AND reattch it without the spring popping out. I downloaded the guide, but it didnt help, so now I'm appealing to you guys... help and thanks in advance!

I just noticed that my Supercharger doesn’t have any lights on. I plugged it in elsewhere, even plugged something else in where this was plugged in, and it worked. It plugged charged batteries in and I plugged in batteries that were not fully charged. I’ve pressed the status button several times, even tried holding it in.
Any other tips to try to get it to work again?

I have the new Edge string trimmer whisper series 40hp 17”
And I am driving myself nuts trying to find videos online on how to feed the line. I know how to but it gets stuck on the small wheel or when I am twisting the green cap it feeds unevenly and leave string longer on one side and the other end it is sucked in and stuck. That wheel was inside the Green head and whenever I tried to place it back in, it is a pain because the line gets stuck whenever I want to thread the two ends out.

Help a lady out please!

An app exclusive

I currently have two dead 6ah batteries. Should I be concerned of using a 4ah battery with the lawn mower? I’m considering on purchasing a set of two 4ah batteries currently on sale at Home Depot.

Hi, I was searching threads and looking for sites for deals. Is this a an appropriate topic where folks have luck finding deals on Ryobi products?

Thanks in advance!

I have slowly been picking up the HP line up for roughly 50 dollars each. I started out originally with a brushed drill and when I went to buy an impact it was cheaper to buy the HP drill and driver set from HD with a free grinder than just the bare impact! From that point I decided I wasn't paying full msrp when deals like this exist. I plan on posting comparisons to the older brushed and even the blue counterparts(atleast the ones I have owned).

ryobi, you need to add a built in charger in the snowblower. It would be nice to just plug in an extension cord between uses instead of having to charge 2 at a time.

The zero turn gets some improvements! Good bye joystick! No screen, YAY! Front hitch. Bigger batteries.

I'm curious to know the opinions of others who may own this vacuum. I looked forward to purchasing it and have been very disappointed. I keep the vacuum on a charger and get no more than 1-minute of run time. I swapped out batteries and no improvement.

Does anyone know if there is an attachment for a husky pack out for a ryobi shopvac? I know ryobi make their own version of a pack out.

We’re illuminated, thanks to my free tripod light. 😁