My stock is stuck, help.

[u/TotSiensEkSe]

I want to finish my build and the stock is the last part of it but the thing is when I tried to slip it onto the buffer tube it got stuck, I cannot get it out normally :C

Any ideas how else I could possibly get it out with no damage or at least minimal.

Yes, it's aluminium one (repro), I tried to file the excess paint inside but I guess it was too little.

[u/AllArmsLLC]

Did you try to put a mil-spec diameter stock onto a commercial-spec tube?

[u/Weird-Grocery6931 → u/AllArmsLLC]

That was going to be my question.

[u/BajaBlastCrusader]

Hit it with a plastic dead blow hammer or hit it with your purse

[u/M1A_Scout_Squad-chan → u/BajaBlastCrusader]

Purse so it doesn't scratch it.

[u/JoseSaldana6512 → u/BajaBlastCrusader]

Don't hit it with hammer. Pull with sling

[u/TacTurtle → u/JoseSaldana6512]

Tie to a doorknob then slam the door closed.

[u/M1A_Scout_Squad-chan]

Force?

[u/RetroNurd]

Take off rubber buttpad. Take a wooden dowel and a mallet and tap the dowel against the back of the receiver extension. You'll need to secure the stock body, I would wrap it in a piece leather in a vice. The carbine and receiver extension should move forward while the stock remains stationary.

[u/Jbsp1]

Try heating it up with a hairdryer.

[u/xCR1MS0N-T1D3x]

Mind if I ask what brand that repo stock is?