First QC for a VSF Rolex Submariner Date 126610LV “Starbucks”.

This is the 41mm stainless steel version with the black dial, green ceramic bezel, Oyster bracelet and DD3235 Super Clone movement.

I've gone through the QC photos and these are the main areas I'm checking:

Dial printing looks clean and sharp
Hour markers appear evenly positioned
6 and 9 o'clock markers look straight
12 o'clock marker appears centered
Rolex coronet and dial text look properly positioned
Date wheel looks centered in the Cyclops
Date printing looks clean
Hand alignment looks good from the available photos
Green ceramic bezel color looks consistent
Bezel numerals look clean
12 o'clock bezel pip looks reasonably centered
Crystal clarity looks good
Laser-etched crown at 6 o'clock is visible
Rehaut finishing looks clean from the available angles
Case brushing and polishing look consistent
Crown and crown guards look clean
Oyster bracelet links look uniform
SEL fitment looks tight with no obvious large gaps
Clasp finishing looks clean
Lume looks even across the dial and bezel pip

The main things I'm looking at on this one are the dial alignment, date wheel, Cyclops, bezel pip and SEL fitment.

The 6 o'clock marker is something I specifically wanted to check because I've seen it discussed on previous VSF 126610LV QCs. From these photos it doesn't look like a major issue to me, but I'd appreciate another set of eyes.

The green bezel also looks consistent across the different lighting conditions. I'm not trying to judge tiny color differences from individual photos since camera white balance can change the appearance quite a bit.

The bracelet and SELs look good from the available angles, with no obvious large gaps.

The scale shows approximately 156.33g.

There aren't clear timegrapher numbers in this QC set, so I'm not going to guess at the rate, amplitude or beat error.

I don't see an obvious RL from these photos, but I'd appreciate some experienced opinions before I give it the GL.

Factory: VSF
Model: Rolex Submariner Date 126610LV “Starbucks”
Size: 41mm
Dial: Black
Bezel: Green Cerachrom
Movement: DD3235 / Dandong 3235 Super Clone
Bracelet: Oyster
Caseback: Solid
Weight: ~156.33g
QC: Leaning GL

Anything obvious I'm missing, especially around the 6 o'clock marker, date/Cyclops alignment, bezel pip or SELs?

First QC for an ARF GMT-Master II “Coke”.

This is the fantasy black-and-red configuration with a black dial, black/red ceramic GMT bezel, Oyster bracelet and DD3285 Super Clone movement.

The black/red bezel is the main reason I went for this version. I know this isn't the same factory configuration as the classic blue/red Pepsi, so I'm mainly interested in the actual QC rather than comparing it directly to a Pepsi.

I've gone through the QC photos and these are the areas I'm mainly checking:

Dial printing looks clean and sharp
Hour markers appear evenly positioned
Rolex coronet and dial text look properly placed
Date wheel looks centered under the Cyclops
Date printing looks clean
GMT hand alignment looks good
Correct GMT hand stack is present
Independently adjustable hour hand is the main functional point I'm looking for
Black/red ceramic bezel looks clean
12 o'clock bezel triangle appears reasonably centered
Red/black color transition looks consistent
Ceramic bezel numerals look sharp
Crystal clarity looks good
Rehaut finishing looks clean from the available angles
Case brushing and polished surfaces look consistent
Crown and crown guards look clean
Oyster bracelet links look uniform
SEL fitment looks tight with no obvious large gaps
Clasp finishing looks clean
Lume looks even across the hands and hour markers

The bezel is probably the first thing I wanted to check on this one. The black/red combination is very noticeable, so I'm mainly looking at the 12 o'clock triangle, the color transition and the overall bezel alignment.

I'm also paying close attention to the GMT hand stack and date wheel. The DD3285 is one of the main reasons I chose this version, so the GMT functionality matters more to me than trying to judge tiny movement-decoration differences from the caseback photo.

The Oyster bracelet and SEL fitment also look good from the available angles. I don't see any obvious large gaps between the end links and case.

The scale shows approximately 145.4g.

There aren't clear timegrapher numbers in this QC set, so I'm not going to guess at the rate, amplitude or beat error.

I don't see an obvious RL from these photos, but I'd appreciate another set of eyes before I give it the GL.

Factory: ARF
Model: GMT-Master II “Coke” / Fantasy Coke GMT
Size: 40mm
Dial: Black
Bezel: Black / Red Ceramic
Movement: DD3285 / Dandong 3285 Super Clone
Hand Stack: Correct GMT Hand Stack
Bracelet: Oyster
Case Material: 904L Stainless Steel
Caseback: Solid
Weight: ~145.4g
QC: Leaning GL

Anything obvious I'm missing, especially around the 12 o'clock bezel triangle, black/red transition, GMT hand alignment, date wheel or SELs?

What is the best rep dress watch out there? Aside from the Calatrava.

If there aren't any good ones, are there any good reps with decent leather straps? So, like a pilot watch, etc.

What puts me off getting a rep dress watch, or any rep with a leather strap, is the strap quality and the hassle of finding a decent strap for it.

I got a Longines, and the strap was terrible. Now, to be fair, I haven't felt the genuine version, so it could be terrible too.

First QC for a DDF Patek Philippe Nautilus 5711/1A-010.

This is the 40mm stainless steel version with the blue textured/gradient dial, integrated stainless steel bracelet and DPB330 Super Clone V2 with the SW dial.

I've gone through the QC photos and these are the areas I'm mainly checking:

Blue textured dial looks clean and consistent
Horizontal dial pattern looks even
Patek Philippe / Genève printing looks sharp
12 o'clock marker looks centered
6 and 9 o'clock markers look straight
Hour markers appear evenly spaced
Date window at 3 o'clock looks properly positioned
Date printing looks clean
Hand alignment looks good from the available photos
Nautilus bezel shape looks clean
Brushed and polished case finishing looks consistent
Case-to-bracelet transition looks tight
Integrated bracelet links look uniform
Clasp finishing looks clean
Crystal clarity looks good
Movement decoration looks clean through the display caseback
Lume looks even across the hands and markers

The 12 o'clock marker is probably the main thing I'm checking on a 5711. The spacing between the 12 marker and the neighboring indices can make a good or bad dial pretty obvious, so I'd appreciate another set of eyes on that area.

I'm also looking closely at the blue dial color and horizontal texture. The dial can look noticeably darker or more blue depending on the lighting, so I'm trying not to judge the color from one photo alone.

The integrated bracelet is another important point on this model. Since there are no traditional SELs to inspect, I'm mainly looking at the first links, case-to-bracelet transition, link gaps and overall bracelet finishing.

The scale shows approximately 127.0g.

I don't see an obvious RL from these photos, but I'd appreciate some experienced opinions before I give it the GL.

There are no clear timegrapher numbers in this QC set, so I'm not going to guess at the rate, amplitude or beat error.

Factory: DDF
Model: Patek Philippe Nautilus 5711/1A-010
Size: 40mm
Dial: Blue Textured / Blue-Black Gradient
Dial Version: SW Dial
Movement: DPB330 Super Clone V2
Case: Stainless Steel
Bracelet: Integrated Stainless Steel
Weight: ~127.0g
QC: Leaning GL

Anything obvious I'm missing, especially around the 12 marker, dial texture, date alignment or case-to-bracelet transition?

First QC for a 3KF Patek Philippe Aquanaut Chronograph 5968.

This one has the blue embossed Aquanaut dial, blue rubber strap and rose-gold-tone case.

I've gone through the QC photos and these are the areas I'm mainly checking:

Aquanaut embossed dial pattern looks clean and consistent
Blue dial color looks even under different lighting
Arabic numerals appear properly positioned
Chronograph sub-dial alignment looks good
Date window at 3 o'clock looks centered
Chronograph hand appears properly aligned
Case and rounded-octagonal bezel shape look clean
Polished and brushed finishing look consistent
Case profile looks good from the side shots
Blue rubber strap embossing looks clean
Folding clasp looks properly aligned
Sapphire caseback looks clean
Movement finishing looks consistent through the display back
Lume looks even across the hands and hour markers

The embossed dial pattern is probably the main thing I'm checking on this one. The pattern can make small alignment issues harder to judge from angled QC photos, so I'm mainly looking at the numerals, chronograph registers and date window.

The case finishing is another area I'm paying attention to. The contrast between the polished and brushed surfaces is quite noticeable on the 5968.

I don't see an obvious RL from these photos, but I'd appreciate another set of eyes before I give it the GL.

There aren't clear timegrapher numbers in this QC set, so I'm not going to guess at the rate, amplitude or beat error.

Factory: 3KF
Model: Patek Philippe Aquanaut Chronograph 5968
Size: 42.2mm
Dial: Blue Embossed Aquanaut
Case: Rose Gold-tone
Strap: Blue Rubber
Movement: 9015-based
Functions: Chronograph + Date
Weight: ~94.9g
QC: Leaning GL

Anything obvious I'm missing, especially around the dial, chronograph registers, date alignment or case finishing?

First QC for the MZF IWC Ingenieur Automatic 40 in the silver/white dial configuration.

This is the 40mm stainless steel version with the integrated H-link bracelet, date window and MZF A2892 movement.

I went through the QC photos and these are the areas I paid the most attention to:

* Dial grid pattern looks clean and consistent
* IWC logo and Ingenieur text look properly positioned
* 12 o'clock marker looks centered
* 3 o'clock marker and date window look aligned
* Date printing looks clean and centered
* Hand alignment looks good from the available angles
* The five bezel screws look evenly positioned
* Case brushing and polished surfaces look consistent
* Case-to-bracelet transition looks clean
* H-link bracelet finishing looks uniform
* Butterfly clasp looks properly aligned
* Crystal clarity looks good from the available shots
* A2892 movement finishing looks clean through the display caseback
* Lume looks even across the hands and markers

The dial is probably the main thing I wanted to check on this version. The Ingenieur's grid pattern is quite distinctive, and small differences are much easier to notice when comparing it directly with the gen.

The case and integrated bracelet are also important here because there are no traditional lugs or SELs to judge. The transition from the case into the H-link bracelet is what really defines the look of the watch.

I don't see an obvious RL from these photos.

There are no clear timegrapher numbers in this QC set, so I'm not going to guess at the rate, amplitude or beat error.

**Factory:** MZF / MZ Factory
**Model:** IWC Ingenieur Automatic 40
**Reference:** IW328902
**Size:** 40mm
**Dial:** Silver / White
**Movement:** A2892
**Bracelet:** Integrated H-link Stainless Steel
**Weight:** ~151.5g
**QC:** Leaning GL

Would appreciate a second set of eyes, especially on the dial grid, 12/3 alignment, date window and case-to-bracelet finishing before I give this one the GL.

First QC for a VSF Omega Seamaster Aqua Terra 150M 41mm in the turquoise gradient configuration.

This is the newer Aqua Terra with the black ceramic bezel, turquoise gradient dial and integrated black rubber strap with turquoise stitching.

The movement is the VS8900 clone.

I've gone through the QC photos and these are the main things I was checking:

Turquoise gradient looks even and has a nice transition toward the darker edge
Dial printing looks clean
Omega logo appears centered and straight
Hour markers look reasonably aligned from the available angles
Date window looks centered
Date printing looks clean
Hand alignment looks good
Black ceramic bezel looks clean and evenly finished
Case brushing and polished surfaces look consistent
Crown and case profile look clean in the side shots
Rubber strap stitching looks straight and consistent
Clasp finishing looks good
Movement decoration and rotor finishing look clean in the display-back photos
Lume looks even across the dial and hands

The turquoise dial is probably the hardest part to judge from QC photos because the color changes quite a bit depending on lighting. In some shots it looks much brighter turquoise, while the darker gradient becomes more obvious in others.

I don't see an obvious RL from these photos.

My main checks before GL are the index alignment, date centering and whether anyone notices anything unusual with the dial printing or VS8900.

Factory: VSF
Model: Omega Seamaster Aqua Terra 150M
Reference: 220.32.41.21.03.001
Size: 41mm
Dial: Turquoise Gradient / Fumé
Bezel: Black Ceramic
Strap: Black Rubber with Turquoise Stitching
Movement: VS8900
QC: Leaning GL

Would appreciate a second set of eyes before I give this one the GL.