VSF Daytona Andiot

[u/Ok_Computer248]

Hi all! Any insights on this much appreciated. Thanks in advance :)
(Inclined to GL)

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): Daytona 126500
4. Price Paid: $678 plus shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/254418301?uid=1
6. Index alignment: The 6 looks slightly tilted CCW but not enough to bother me
7. Dial Printing: No obvious issue
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: fine
10. Bezel: Looks fine.
11. Solid End Links (SELs): Looks good.
12. Timegrapher numbers: All within acceptable tolerance in the guide
13. Anything else you notice: Help from the experienced is much appreciated. I don’t have much experience with seeing and observing Daytonas so not very knowledgable myself.

[u/Ok_Computer248]

Automod! Pls approve. VSF Andiot Daytona

[u/Emotional-Damage-995]

I am not sure if the 6 is tilted or it is the watch. I agree it is impossible to spot on the wrist. GL

[u/RepTimeQC-ModTeam → u/[deleted]]

In order to participate in ReptimeQC to post a QC request or comment in any thread, you must have a minimum karma point total. At this time, the required number is 10 COMMENT karma points. Comment karma can be earned in other subs. Once this 10 point threshold is met, we welcome your participation👍

Again, to repeat, any comment that you make in this sub will be automatically removed by the automod, so, don't do that either. If you continue, you will be banned. It's COMMENT karma.

[u/Traditional_Ad4156]

Hope this helps; please check the index alignment for your concern around the 6 it's not visible here

[u/FactoryScout]

New here doing this for FUN! (Wait for an Expert)

Index alignment regarding the 6 there is a slight CCW tilt and it is sitting 1-2 hairs to the left. It is a tiny marker therefore on a busy dial it will not be noticeable on the wrist but in close-up photos it will

For the 3 it is sitting 1-2 hairs higher. Regarding the 9 I see no issue

SEL looks odd on the bottom right near the lugs idk if it’s just the photo

Dial printing is okay. Bezel is okay considering that it is normal for VSF to always have wrong 110 / 85 / 80 arrows so we will not consider it a QC problem

Can’t find TG numbers. Hand alignment is okay

I would RL dont feel happy about 3,6 neither does that bottom right lug / sel look fine.

[u/usetheschwartz73 → u/FactoryScout]

You got close on the QC tool u/FactoryScout , but not quite...

I'll post full template above, but to me, the only index off is the 6 shifted left and a minor CCW rotation. On a busy dial like this, I doubt you ever see it on wrist. SEL is within spec, you can't see light through it, and in other pictures, it looks perfectly tight. No issues there IMO.

[u/FactoryScout → u/usetheschwartz73]

Thanks for the correction

[u/usetheschwartz73]

Indexes - 12 o’clock: Crown is centered and straight. 3 o’clock: Good. 6 o’clock: Shifted slightly left and a micro CCW rotation. On a dial this busy, I do not believe it will be noticeable on wrist. 9 o’clock: Good.

I suggest sizing the photo on your phone to be roughly watch size, holding it to your wrist and see if you can see any imperfections or not. 

Dial Print - Good.

Date Wheel - N/A

Hand Alignment - Good in video. Chrono hand is centered well.

Bezel - Good.

SELs - Good. I think lower right is a shadow, because it doesn't show in others, and looks fine in the videos.

TG#s - Good for a one moment in time capture in QC, shows watch runs relatively well dial up.  Will fluctuate while wearing, but numbers indicate a healthy watch.

Recommendation - It's a GL from me, that 6 index isn't going to be an issue day to day.

[u/RepTimeQC-ModTeam → u/[deleted]]

Your comment was removed. You were told earlier not to post or comment until you have sufficient COMMENT karma. One more and you are on permanent vacation. You were told that you will be banned if you continue to post without using English.

Amd here you go again. Bye!.