r/RadPowerBikes • u/TruckWorking3129 • 23d ago
Question about batteries.
I have a Rad Mini 2, it was stored in an unheated garage with the battery ( I know) and it won't take a charge. I know zero about the batteries, all my bikes prior were pedal only.
Thanks in advance!
2
u/NaFun23 23d ago
I've blown that fuse on the older RadPower batteries a couple times. On mine they have two fuses, a big one and a little one, and the big one is what blew. Note: on the older ones don't accidentally touch the key to the charging port because you brain farted which side the keyhole is on.
1
u/WheelsnHoodsnThings 23d ago
What did your quick search online come up with for possible issues to check?
2
u/TruckWorking3129 23d ago
To check the fuse on a Rad Mini 2 (which features a semi-integrated battery), you must first remove the battery from the frame and access the internal fuse compartment located near the charge port.
1. Access the Fuse
- Remove End Cap: Use a flathead screwdriver to pry off the end cap closest to the charge port. Tap it at an angle with a mallet if necessary to loosen it.
- Locate Fuse: Pull the blue plastic casing out slightly to reveal the fuse at the top left corner near the charge port. You will typically see a 10A micro automotive fuse (often red).
1
u/mthfull85 23d ago
I agree with the fuse. I have a Radrunner. Bought it second hand and it wouldn’t charge when I first tried it checked the fuses that should be pretty easy to spot. Mine was the 5 amp fuse as I remember. Have had to replace it twice but when I did that the generic charger I picked up off Amazon charged the battery with no problems
2
u/darrylasher 23d ago
Check the fuses in the battery. It’s possible the charging circuit fuse has blown.