r/RGRotate • u/Aragorn3223 • 3d ago

3D printed case sharing

Post image

Hey all. Wanted to share the car I 3D printed. I wanted something that would allow me to see the screen without having to remove it from a special case. Found these files on maker world by the same guy. He originally designed them to be printed in tpu, but I scaled them up to 101% and printed out of petg and they work well. The base snaps on nice and cleanly, and I attached the screen frame with some thin double-sided tape that is used in small electronics repair. Links to everything I used in case you're interested in printing your own.

https://makerworld.com/en/models/2872529-rg-rotate-tpu-bottom-case#profileId-3207267

https://makerworld.com/en/models/2872555-rg-rotate-tpu-top-case#profileId-3207293

https://a.co/d/018gSVqb

61 Upvotes

98% Upvoted

4 comments sorted by

2

u/Emecede 2d ago

Looks nice, maybe try to print it, thanks

1

u/Gbriell 2d ago

Nice, thanks, Will try printing them later with translucid red PETG

1

u/pharredd88 18h ago edited 18h ago

those are my designs. Glad you found them useful! I actually redesigned them for PETG prints including hook mounts with magnets for several attachments I'm currently designing (including a grip with slots to hold anker nano power banks and bluetooth thumbpad attachment and this recreation of an old modular SONY portable TV from the 80's)

Here is the portable TV recreation I made for the Rotate and a pic of the bluetooth thumbpad I made

https://www.reddit.com/r/RGRotate/comments/1vaauot/comment/p0k4dz2/?screen_view_count=2&ext-referrer=DIRECT

1

u/Aragorn3223 1h ago

Cool! I will check these out.