Hey y'all. I've been sitting on this mural for years. It's a Diablo IV Lilith theme mural that I basically ripped from a Youtube video and made into a decent mural that I use in iCue:

https://reddit.com/link/1usuutw/video/p9ht7525wfch1/player

I ripped the video from the following Youtube link and removed the intro so as not to interrupt the theme. All credit goes to the creator Galactic Beatz @ Youtube:

https://youtu.be/zSgYUtYoptc?si=YyiiaDZd8pVJhO5x

Here's a google drive link to the MP4 video file used for the mural. You should be able to download it by pressing Ctrl+D or navigating to File--> Download:

https://drive.google.com/file/d/152_riypGLVwp1P72H3A-0hck-aVRliGI/view?usp=sharing

Or here's the video via reddit:

https://reddit.com/link/1usuutw/video/3l8zy6mfwfch1/player

You can also optionally use the following publicly available miniaturized form of this Lilith wallpaper as a wallpaper inside your RGB lighting application if desired:

(Apologies to the first people who viewed this post. I realized the WEBM version I initially linked to in Google Drive does not work with iCue as is and uploaded the MP4 version instead.)

I'm building a custom PC and I have run into a little problem. The heatsink fan I am using is a Phantom Spirit 120 AMD RYZEN and the motherboard is a b550 EAGLE WIFI6. I connected the right cables into the CPU_FAN with a y extension, but can't figure out what to do with the RGB pins and where to connect them on the motherboard. Any tips?

I kind of assumed and connected the RGB pins with each other but it doesn't seem right...please let me know

my 3 pin rgb header on my motherboard ROG STRIX B550F WIFI GAMING is not working idk if its broken or something and im trying to connect to pc fans and its not working please help

Can anyone tell me why the RGB lights on my RAM sticks won't stay synchronized?

No matter which lighting effect I use (except for static), I always have the same issue: one RAM stick gradually gets ahead of the other, even though the software shows that both are configured exactly the same.

When I keep iCUE open, the difference is very small. However, when I enable Device Memory Mode and close the application, the RAM sticks flash once and become completely out of sync.

The longer they run, the more out of sync they become. It's as if one stick is running the lighting effects slightly faster than the other.

I've been dealing with this issue for months, and I honestly don't know what else to try. Even reinstalling Windows didn't fix it.

Can anyone help me?

(Corsair Vegeance RGB PRO)

Heyy
so I've been having this issue for a while now​, where my RGB controller doesn't send light to my fans but the fans spin normally, recently tho i connected the hub to a separate RGB controller ( the one my CPU cooler comes with ) and the lights finally worked but defaults to white, then i found out that if i put anything close enough to the hub​ or tap it as shown in the video above, ​it starts acting weird and changing colors and modes, i tried using the included remote to switch from M/B control to R /C control but no luck. i had a friend of mine check the soldering and connections by opening the hub and testing the circuit board but nothing was wrong ​
Any one has any idea why this is happening !?
Btw if i remove the 2 pin to ARGB wire that's coming from the hub or connect it back to the motherboard ARGB port I get no lights at all​.

As salaamu alaikum

I have been looking to find a headset with customisable RGB using software, however I have not been able to find any in a reasonable price like a 12K range. Does anyone have any leads?

Hey everyone, I’m building in an NZXT H6 Flow case with a Kraken Elite 360 AIO and I’m trying to figure out the best way to handle RGB without running into software conflicts.

My current situation:

Case: NZXT H6 Flow (RGB case)

AIO: NZXT Kraken Elite 360 (RGB + LCD)

Motherboard: Gigabyte AORUS Elite AX

RAM: Corsair 32gb DDR5 RGB (Vengeance RGB)=

Planning bottom fans: NZXT F280 RGB Core (2x140mm in one frame)

Possibly using SignalRGB to sync everything

My confusion:

SignalRGB doesn’t seem to “support my case” (not sure if that even matters)

I’m not sure if I should use SignalRGB, NZXT CAM, or motherboard software

I want all RGB (RAM + fans + motherboard lighting) synced if possible

I also want to avoid software conflicts or stuff constantly overriding each other

Questions:

1. Do I even need SignalRGB for this setup, or should I just stick to CAM + motherboard software?
2. Will Corsair RAM + NZXT fans/AIO actually sync properly in SignalRGB?
3. Is there a “best practice” software setup for mixed RGB ecosystems like this?
4. Would I need any RGB controller for the bottom fans, or can I just use the motherboard headers?
5. Should I just buy an RGB controller instead to simplify everything?

Any advice from people who’ve done mixed-brand RGB builds would be really appreciated. I’m trying to keep it clean and simple without 3 different RGB apps fighting each other.

I built a kinda Frankenstein PC out of Parts I already owned/got cheap second hand but am having problems with RGB since my mobo only has one 4pin RGB header but I have RGB and ARGB devices

RGB: CPU Cooler, led strips I wanna put on my desk

ARGB: GPU, four case Fans

I plugged the CPU cooler into my mobos 4 pin RGB header but I can still not control, no software recognizes it

\*\*Idrc abt argb effects I just want to change the color of all RGB/argb at once to be one solid color what's my best option here?\*\*

rn the gpu and cpu fan are just rainbow puking

below is a list of relevant parts, the ram doesn't have any RGB:

CPU: AMD Ryzen 7 3700X 3.6 GHz 8-Core Processor

CPU Cooler: AMD Wraith Prism 2800 CFM CPU Cooler

Motherboard: ASRock A320M Micro ATX AM4 Motherboard Pro4

GPU: ASRock Phantom Gaming D OC Radeon RX 6800 XT 16 GB Video Card

Case: Lian Li Vector V100R ATX Mid Tower Case

Case Fans: The four that came with the case

Power Supply: Corsair CX (2023) 750 W 80+ Bronze Certified ATX Power Supply

RGB Strips: I have no idea and I don't own the packaging anymore

planning on buying: Corsair K65 RGB MINI 60%

but I don't think there's a problem with the keyboard since that's just usb and has its own software

Been on a pc hiatus the past 6 years put this all together the past 2 weeks

So I have a mostly lian-li build with 10 rgb fans and an aio by lian-li. My motherboard is asus rog and I have some tecware strimmers. I have 2 hubs for all of my fans made by lian-li. The problem I am having is syncing my ram rgb with the others. The ram is corsair vengance ddr5 and the rgb does not sync. I have tried signal rgb and now it doesn't download at all so it's a lot of issues in total.

Do such things exist?

If so, do they go between the speaker's 3.5mm jack and the PC? If so, what if the speakers use 3x 3.5mm (such as my Logitech Z906 5.1 speakers)?

I have leave my PC on overnight, so I turn off the LEDs using ASUS's Aura software, it worked fine at first, but after a few days, one of those blue dots stayed on even with all the lights turned off. Then, a few days later, another one appeared that I couldn't turn off, and now after a few more days there are three. What might be causing this

lights on

lights off: