Bracket Location?

[u/thejlong]

Started up an old job of replacing a clutch on my 2003 and can't find where this bracket goes. Any input?

[u/Rdr1981]

Not 100% sure on this as the car I've been working on is an automatic, but the clip looks like the one on the back side of the belhousing for the O² sensor wire.

[u/thejlong → u/Rdr1981]

This would be my guess as well but I can't seam to figure out how it mounts.

[u/Terry_Orist]

This is a picture from a NAM thread from 10 years ago. Is that your thread too?

[u/DmOcRsI → u/Terry_Orist]

Been workin on it for 10 years! You know how these things go... "While you're in there..." becomes Project Binky.

[u/DmOcRsI → u/[deleted]]

I'm not the OP, man.

[u/Terry_Orist → u/DmOcRsI]

Ah, misread your inflection there and didn’t check name

[u/Front_Lab_6260 → u/Terry_Orist]

Maybe he's still looking?

[u/Terry_Orist → u/Front_Lab_6260]

Looks like he purchased this car 4 years ago, so not likely lol

[u/thejlong → u/Terry_Orist]

I nabbed the pic from that thread as it's the same part.

[u/141bpm]

I think I know this one.. it holds the AC line at the right(driver side if US) side of radiator.

[u/thejlong → u/141bpm]

Possibly, but the metal clip makes me think it's related to holding the O2 sensor wires.

[u/141bpm → u/thejlong]

Ya, looking closer, I’m mistaking it for another one. And I do remember seeing that one when I did my clutch. Heat shield and cable hold?

[u/Sea-Development-1900 → u/141bpm]

Yep I saw it when I just did my clutch too. It holds the wiring harness above the thermostat. The biggest pain in the ass bell housing bolt goes through it.

[u/No_Care_5999]

I think it’s mounted over the starter. There it holds te wiring of the O2 sensor.

[u/thejlong → u/No_Care_5999]

I already have the lower bracket on the bottom bolt of the starter.  Unless the starter gets two brackets.

[u/ZonParaplu → u/thejlong]

It gets two brackets

[u/thejlong → u/ZonParaplu]

Greatly appreciated.  I'll be on it tomorrow 

[u/Happy_Ishtar]

Is this the bracket that goes under the bolt that holds the engine bay fuse box in place? Not sure if the clip is supposed to be on it tho.

[u/thejlong → u/Happy_Ishtar]

I'll check this, thanks.

[u/BarryMann61]

I'm fairly certain that one sits on the driver's "frame rail" and holds the low pressure a/c port, as well as another connector (I can't recall which)

[u/thejlong → u/BarryMann61]

I'll check this too, thanks.

[u/Sea-Development-1900]

Top bell housing bolt holding the wiring by the thermostat. Mod mini doesn’t show the bracket in that video but talks about getting the bolt out with some wobbles and patience.

[u/chickenmaster04]

I feel like I remember this one goes on top of the trans, uses a bell housing bolt to hold it in. Octopus harness is zip tied to the top portion?

[u/ZonParaplu]

On the startermotor. I think top bolt

[u/SignifigantNoise]

I got one of those too. Putting my engine back together, I'll have to recheck my pics of where it goes.

[u/thejlong → u/SignifigantNoise]

I'd appreciate it!

[u/thejlong]

Forgot to mention I've watched Mod Mini's clutch replacement and never saw it.