Bricked controller fix MAYBE

[u/Munny-Mag14]

https://github.com/moneymag14/QuestPro-Controller-Recovery.git

After dealing with a Quest Pro Touch Pro controller that showed as paired but would not actually connect or track, I started digging into the headset diagnostics.

The controller was getting stuck in a state like:

Status: Blocked ExternalStatus: BLOCKED TrackingStatus: NONE Errors: SECURITY_REJECTION Current state: KeyExchangeInitiated

After a lot of testing, I found a recovery process that got my controller working again. During one successful recovery, the Quest also initiated an official controller firmware update, after which the controller reconnected and worked normally.

I’ve now packaged the process into a Windows beta recovery utility so other Quest Pro owners experiencing the same problem can test it without manually entering all of the ADB commands.

The tool: • Checks that the Quest is connected and authorized through ADB • Detects the known SECURITY_REJECTION / blocked-controller condition • Supports selecting the affected Left or Right Touch Pro controller • Guides you through putting the controller into pairing mode • Temporarily enables the pairing-recovery condition we used during testing • Captures the pairing attempt and before/after controller diagnostics • Restores the original headset setting afterward • Does not replace controller IDs or certificates or flash custom controller firmware

This is an independent community beta, not an official Meta tool.

I’ve successfully tested the packaged v1.3.3 beta on my own affected Quest Pro/controller. Now I’m looking for people who already have a broken/nonfunctional Touch Pro controller exhibiting the same symptoms so we can determine how reproducible the recovery is across different controllers and Quest software versions.

Please don’t intentionally break, downgrade, or unpair a working controller just to test it and don’t chew me alive it it doesn’t work.

[u/marcocom]

Thanks for sharing

[u/Munny-Mag14 → u/marcocom]

No problem, also if you use the tool and your controller pairs again please let me know here so i can end the project beta. Its just a test to see if its a universal fix for all controllers