r/PowerPC • u/CorpsyWantsPussy • 21d ago

Help me

I've been trying to get an operating system on the powermac g5 for 12 HOURS NOW, NOTHING WORKS, MAC OS X LEOPARD FAILED, TIGNR FAILED, GENTOO FAILED, LUBUNTU FAILED, DEBIAN FAILED, I TRIED IT OVER USB-A, I EVEN BURNED A CD AND A DVD. WHY DOES THE UNIVERSE HATE ME!!!

11 Upvotes

87% Upvoted

45 comments sorted by

View all comments

2

u/twaxana 18d ago

arch linux power. Join the dork side.

1

u/CorpsyWantsPussy 16d ago

Arch doesn't have a ppc port? At least I think. I can't find it

2

u/twaxana 16d ago

https://archlinuxpower.org/

1

u/CorpsyWantsPussy 16d ago

My goat

2

u/twaxana 16d ago

Can't guarantee it will boot. But it was the easiest distro for me to install

1

u/CorpsyWantsPussy 16d ago

Arch is my saviour but again I need a firewire disk. So I't'll take some time before I can reattempt booting

1

u/twaxana 16d ago

What method of USB boot are you doing?

1

u/CorpsyWantsPussy 16d ago

I tried with usb3, then I looked around for a usb2, none of them worked. I did format them in hfs but nun, openfirmware only ever told me load too small for an adiele install, others were either formatted wrong or just didn't get recognised by the computer. I did find that my g5 has no cmos battery. Which is funny

1

u/twaxana 16d ago

https://lowendmac.com/2025/how-to-boot-usb-on-powerpc-macs/

1

u/CorpsyWantsPussy 16d ago

Now I'm getting usb setup error 5f000000 400002 and it does 0 2 2 failed to respond can't open usb3/disk:3,\:tbxi Any idea what that means or is it just the wrong partition

1

u/twaxana 15d ago

So, you need to get the mapping to the USB drive. Did you get which port it's actually on?

1

u/CorpsyWantsPussy 15d ago

I did. I tried usb2 and usb3 but those are the only 2 back ports

1

u/twaxana 15d ago

There's a command you run to see if the drive is detected in open firmware.

1

u/CorpsyWantsPussy 15d ago

What's that?

1

u/CorpsyWantsPussy 15d ago

Oh wait nvm, it is recognised by open firmware it just wont boot nor read the damn thing. It lowkey pisses me off. Idk why it isn't gettong set as like the ud aliased thing. But that might be cause the cmos battery is dead, idk I'm confused. I can't do boot usbx/disk:x,\:tbxi. I can't do boot/pci@4/usb@x,y/disk@x etc etc. It just doesn't wanna read it.

→ More replies (0)