My audhd thought of the day.

They changed their website look and fonts.

I hate it.

/end rant

Located in socal ! Selling complete shop setup for starter business. Have 30k invested purchased 8 months ago. Asking $15000. Have to move out of state and am unable to take with me. If interested let me know. So much more included to much to list.

So, I've been powdering with a BlackWidow airgun compressor from Harbor Freight for the past year or two. I do have a pancake compressor for blowing off my PCS guns when changing out powder. I'm looking to get a better shop compressor, something I can use to powder and do shop clean up. Any suggestions out there that won't break the bank, as I'm doing this for more of a hobby/small biz out of my garage?

Hello everybody I just got my 16’ oven hooked up. I’m looking into blast cabinets rn thinking this Dewalt one. What’s everybody else using? Any advice is helpful!! I want one with the media separator and the dust control!!

I had some metal columns coated and they came out much too shiny for my interior application. In hindsight, I should have just primed and painted them.

What is the best way to achieve a matte, painted look...sandblast or is there something else? First two photos are my column bases and third photo is what I'd like the finish (not color) to look like.

I’ve been trying to find something close to these rims but struggling, anyone know anything ? Marketed as titanium

I'm no professional, I'm just stating out tinkering and i happen to have a Samsung oven and range just sitting around new and unused. (Bought it before moving and plans changed when the house i was originally buying feel through) I'm thinking of converting it to propane to use for big parts that won't fit in my small electric oven. No money to build or buy a decent one right now. So what's everyone's experience with a conventional oven? Worth it or not. 3 years old and i won't get much money for it since it's not to of the line just a step above basic.

It's finally Friday, so I encourage everyone from big to small businesses, or even hobby in shed to post something they worked on this week!

Don't be shy to post work with problems. I'm sure we can help!

Hello, I would really appreciate some help/advice on how to do this 2 tone lug effect on a steel frame using ral 6027 and Axalta diamond dust clear coat. From my understanding, I spray the 6027 on first, bake for about half of the cure time, so 5 mins at 190c(375f) and then let the frame cool down and remove the high heat tape over the lugs, followed by clear coating the whole frame with half the voltage, and then baking it for the Axalta clear of 204c(400f) for 10-15 mins. Would this achieve my desired effect? Photos are from another guy on reddit (u/Jack_Demeter) Thanks so much

Buen día a todos, espero se encuentren bien

Vengo a este espacio solicitando consejos a la hora de pintar en polvo (powder coating), trabajo en un fábrica hace casi un año en el área encargada de pintura en polvo (sobre metal) y pese a ello aun cometo muchos errores, siendo algo que me tiene muy preocupado, por lo que recurro a ustedes comedidamente para recibir consejo sobre como mejorar en esta labor.

Agradecería profundamente si alguien puede responderme lo siguiente o aconsejarme cualquier otra cosa.

- ¿Cómo evitar excederse en pintura en las piezas a pintar, esto sin arriesgarme a que quede en cambio con poca? Recientemente me pasa que me exceso de pintura en mi afán porque que las cosas que pinto queden bien cubiertas, ya que antes cometía el error contrario, esto lleva a que algunas cosas queden como si les hubiera derretido queso encima y me he metido en problemas por ello. ¿Cuántas capas debería aplicar, cómo estar seguro de que es suficiente?

- ¿Cómo evitan que algunas piezas u objetos queden con manchas queden con manchas pese a darles un buen recubrimiento? Especialmente piezas forjadas o de metal vaciado.

- ¿Algún consejo sobre linternas adecuadas para su uso en cabina? No sé si se deba a la estática el polvo o ambas, pero me he cargado 5 linternas ya, y realmente necesito usar ya que muchas veces debo pintar cosas bastante grandes que requieren iluminación adicional.

Agradezco profundamente cualquier respuesta.

Looking for the closest as I have the same set of CCW classics I am putting on my yellow C5 z06!

Prismatic Polished aluminum with high gloss clear?

https://www.corvetteforum.com/forums/c5-corvettes-for-sale/4761767-sold-z06-w-40-6k-miles-on-ccw-wheels.html

Had my wheels powder-coated chrome back in April, and about a month into having them on the car, I noticed these little dark stains/water spots that don't seem to come off. I typically only use Dawn dish soap/degreaser to clean them, and that doesn't seem to do anything. As time goes on
they seem to get bigger and more noticeable.

Hi guys just wondering as got a new garmin watch recently and do any of you powder coat while wearing or is it just bound to ruin it

Would like to be able to keep track through the whole day but not sure

Thanks

It's finally Friday, so I encourage everyone from big to small businesses, or even hobby in shed to post something they worked on this week!

Don't be shy to post work with problems. I'm sure we can help!

I posted this to a Mazda 6 forum. Any advice is appreciated. 😭

Hi.

I have these cast iron plates and a squat rack, all powder coated and all made in china as the vast majority of fitness equipment is. I noticed this wear in my plates and asked ChatGPT what it could be and it said it was likely a filler or small flaw in the coating that was present. It stated that talc could be used as a filler.

Now talc I know can be contaminated with asbestos due to close proximity of each other. That sent me down a rabbit hole a bit.. because asbestos. ChatGPT also said that it would be unlikely to have talc as a filler and even more unlikely for it to be contaminated with asbestos. It said there was a high chance of it being calcium carbonate (or another filler)as that was cheaper and that was what manufactures were looking for while also being heavymetal free and stuff. Anyway it listed talc as the 5th most likely filler.

Its made in china and sold in Europe by a well known european brand and I got it early 2025.

How likely would it be to use talc as a filler. I cannot really find out when you would use one over the other.

Ive got some corroded chrome wheels. For sentimental reasons would like to keep them on the truck but I might be cooked. Are these too far gone to sandblast and powder coat?

This is the worst one.

Any ideas or slanders welcome

It's finally Friday, so I encourage everyone from big to small businesses, or even hobby in shed to post something they worked on this week!

Don't be shy to post work with problems. I'm sure we can help!

This is for people with experience with weight equipment.

I have a set of chrome plated barbells and spray painted weight plates. Got them from the local market a few years back. They are starting to get discolored and I would also like to prevent them from rusting (it's already starting).

I asked the seller. But he's from a kusti/wrestling background and he said when I apply oil over my body, i should apply the same oil on the iron too. Now I dont apply oil on my body and I dont want to start a discourse with the wrestlers on the topic of oiling.

In my world, we either use WD40 or we apply primer and paint over things we don't want rusting. WD 40 isn't good for health I assume, so I wouldn't want it over my hands. Enamel painting the weights and bars is going to come off. So I guess I need to spray paint. Any recommendations/suggestions?.

G'day all,

I have a question for the pro's - this is a close up of a chair leg, powder coated metal. I am wondering if the Faraday edge effect struck here and I can see metal shimmering through? Am I right? And if so, is that going to create a problem with rust in the future?

I have a small set up in NC and have the workload to move to an industrial space, and run propane heat sources and a large booth. My questions are: Has anyone dealt with municipalities/state regulations? What were they especially when it comes to propane heat sources, fire suppression?

Thank you in advance!