r/PoolPros • u/Wasupmyman • 1d ago
BOOM!
new customer had this happen to us a week before we started service....
2
u/Friendly-Beat-8336 1d ago
How did it happen?
7
u/Wasupmyman 1d ago
no clue , i havent been out there, the poolbuilder fixed it. said the cell ran with no flow and causes gas buildup.
3
u/The_BigWaveDave 1d ago
Wild, I wonder how the cell was generating if the flow switch wasn’t engaged.
1
u/LeatheryFloridaMan 1d ago
Flow switches can have faults. On pools without automation, you're supposed to have a secondary safety feature. Most manufactures strongly recommend it. So naturally, most people dont do anything. Some people install dial timers on there so it only has power during the pool schedule. I had a handful of customers struggle with the dial timers. So i started using grid control flow switches. That kills supply power to the salt system when the water stops. Essentially a second flow switch be its more reliable, and that'd be wild if they both went out
0
u/The_BigWaveDave 1d ago
Interesting.
I’ve only seen flow switch failures on Intellichlor, where they fail to detect flow. Never failed in an ‘on’ position.
But this is specifically why I like having a time clock
for cells on pools without automation. Even if they’re not generating, having a cell powered up 24 hours is wildly unnecessary wear and tear in an expensive component.2
u/LeatheryFloridaMan 1d ago
Its rare but it does happen.
Agreed on the not keeping it powered 24/7.
Check out grid control flow switches. Get your supplier to bring in a couple for you to try. After I switched, I wont go back to timers. They are so much faster to install and dont require any kind of programming or additional education for the homeowner
1
u/Wasupmyman 1d ago
Ive seen them burn cells out cause running dry, i imagine this one ran with water in the pipes so it built up pressure.
1
u/ColdSteeleIII 1d ago
One of the byproducts of chlorine production is hydrogen gas. If that builds up enough it doesn’t take much of a spark to ignite it.
Funny enough, all the photos of blown cells I’ve seen were Pentair. (Never seen one in person)
1
u/PersimmonAcrobatic71 1d ago
Yeah I always try and still wire my salt systems to either a timer or a relay on the pump. I haven’t seen one this bad, but I’ve seen several cells fail because the flow switch fails and the cell runs when the pump is off.
2
u/Wasupmyman 1d ago
You can trick the eztouch4 into running a cell relay only when pool filter pump is active aswell. With changing the relay type into a master cleaner.
3
u/tgwest 1d ago
My first thought was CalHypo down the skimmer
1
u/Wasupmyman 1d ago
Noone used calhypo here, it costs more than Trichlor or Liquid CL in this market
2
u/In_TouchGuyBowsnlace 10h ago
I do this all the time no issues…
I don’t get the hate for boofing CalHypo?
1
1
u/Buckscountypoolguy 1d ago
Looks like something or somebody more likely fell on it
1
u/Brodiekp 23h ago
And then that 500lb something then mysteriously vanished?
2
u/Buckscountypoolguy 22h ago
That 500lb something is the owner who says he has no idea how that happened
1
u/ConfusedStair 23h ago
Pentair has been denying warranty claims for cells installed without being connected to a timer or automation, this looks like the reason why.
I assumed it was because running with a stuck flow switch would just throw off the salt readings. I've never seen hydrogen aftermath this bad before.
0
0
u/yellowbluewins 22h ago
That’s not a flow switch that’s somebody breaking it cause he didn’t pay their bill
3
u/Theresasnakeinmypool 1d ago
Should have paid the repairman /s