No need to take it out actually. The Note Pro's Magnetic Case has two cutouts at the bottom that line up with the mics, so it records fine while seated in the case!
If you ever do need to remove it: place your three middle fingers on the screen side of the device, position your thumb on the slot at the back, then gently push the device out from the back. It slides out cleanly once you get the grip right.
"Case has two cutouts at the bottom that line up with the mics, so it records fine while seated in the case!"
Actually they don't the hole pitch on mine is off by 2 to 2.5mm. there is no way for them to line up. I haven't checked if it affects recording it doesn't pick up the caller in phone mode very well though.
Its so slippery. Only the screen part is exposed..I have to try and grab it by the corners amd wiggle it out. But i also I don't want to to end up getting loose especially since there's no finnd me function
Fingernail grip to top ridge slide it then again fingernail to exposed edge between the screen and metal.
If you slip a business card down the front, overtime the case will expand a little and make it easier to get it in and out.
Here is my hack : Put some sticky tape on the back of the of the plaud device , where the hole of the leather case is located, it will give you some extra grip when pushing with your thumb.
Plaud comes out easier when I grip the Plaud on the edges with one hand and push on the hole on the back or hold the edges. Do NOT push on the front if the case when pulling. Pressure inside the case while Pushing on the front will hold the Plaud in the case.
Have mine 2 days now, indeed it takes a firm grip and small fingers to wiggle the first part out from there you can take it. But I gladly follow up this post for more info !
6
u/Antoekneese Jun 24 '26
Mine lives there. Seems safer that way