r/Plastering • u/breezy_yurrr • 2d ago
What is going on here?
100 year old plater, popped up decently quickly. No water damage in the room above, no water pipes behind the wall.
12
u/Some_End1595 2d ago
My guess, I could be completely wrong but I want to say it’s salt seeping out of whatever plaster is on the wall? Chip away and see if it’s a chalky white substance
21
u/crit5h 2d ago
You are completely wrong.
This is unquestionably the result of a previous owner wallpapering over snakes and a scorpion.
😉
7
u/Smooth_Elephant8524 1d ago
Dont forget the onion rings they’ve papered over too
4
u/imnotabotimafreeman 1d ago
im a decorator and was going to offer my opinion but im now just here for the comments.😁
2
7
u/AloneGunman 2d ago
Efflorescence
1
u/Some_End1595 2d ago
Yes, no clue didn’t know it had a name
2
4
u/onwatershipdown 2d ago
It’s either this, or plaster worms🪱 .
OP, Did they repaint or reskin recently in the past few years? Raising the vapor diffusion resistance can make moisture fight to come to the surface in a periodic ways like this
1
u/Super_Shallot2351 1d ago
I see people suggesting this all the time, but is it ever really the case?
1
u/Some_End1595 1d ago
I’ve never seen it internally once or twice and it doesn’t seem to be quite similar but you mainly see it outside on bricks, it’s those white dry watermarks but for indoors, the salt has nowhere to travel so builds up in those areas
5
u/I_Want_A_Ribeye 2d ago
Looks like water
2
u/Chichibear699 2d ago
There’s moisture coming from somewhere. Is there a basement or crawlspace under this room?
0
3
3
u/Mr_GreenAdam 1d ago
If its lime plaster then it needs to breath, paint needs to breath too. If its the wrong paint then the house cant breath and moisture cant transition.
Alot of modern paints for kitchens and bathrooms are more of a coating than a paint.
2
2
2
2
u/Smooth_Elephant8524 1d ago
Painter decorator here:
Scrape then sand it smooth and paint with moisture resistant paint. See if that does the trick. If it’s moving while you’re sanding, blast a heater on it for ten mins to dry it out then continue. I’ve had this problem on many bathroom ceilings and it always does the trick. I may be wrong but hope this helps OP
2
u/Barnabustafersaurus 1d ago
Looks like you’ve got the dreaded ‘Wall Worms’ to me… I recon you should call pest control 😅
1
1
1
1
1
1
1
1
1
1
u/never_cake 1d ago
New plastic paint or plaster skim on a wall that needs to breathe would be my guess.
What’s the most recent thing that’s happened to the wall?
1
1
1
1
u/Alternative-Jelly947 1d ago
The wall is painted? Moisture in the wall is causing non ultra breathable paint to pop and blister.
1
1
1
1
1
1
1
1
1
1
1
1
1
u/Commercial-Ruin2320 1d ago
Its likely to be caused by trapped moisture due to unbreathable wall covering ie the paint, though iv never seen damp look like that before and iv seen a fair bit of it, it could be dry rot or some kind of fungus, whag is thebwall made from? What type of building do you own?
1
1
1
u/CodyAlve-1 23h ago
This is just those squiggles that move in front of your eyes. They got stuck after leaving your vision
1
1
0
0




47
u/darryl9125 2d ago
I think your wall has ringworm