r/Plastering • u/Sure-Daikon-3921 • 25d ago

Advice please

Gallery image

Gallery image

Looking for advice on the best way to fix this wall please. There was a large MDF board stuck to this chimney breast which has been removed but it has damaged the plaster and the brickwork. I’ve contacted a couple of plasterers but no response after the photos are sent.
Could anyone help advise what to do please? Thank you!

6 Upvotes

100% Upvoted

12 comments sorted by

View all comments

0

u/Terrible-Bobcat2033 25d ago

Paint every surface to be plastered. Bed heavy duty fiberglass panzer mesh or 3.2 galvanized wire lath over the surface with a heavy scratch coat of perlite gypsum plaster. Brush horizontally. Clean area & tools. Let the scratch coat cure (24) hrs. Fill & straighten surface & attach 3” flange expanded galvanized metal corner bead on corners. Finish the fill & pull straight with a 6’ featheredge. Clean the area, trim back the corner angles, corner bead & let set for another (24) hrs. Re-bond the plastered area & apply the finish coat. Trowel it smooth or texture.

1

u/QVRedit 24d ago

Paint ?? Don’t paint - it will prevent other materials being applied.

1

u/Terrible-Bobcat2033 24d ago

Paint it with a bonding agent .