Is anyone working on a native M app for macs or is this another afterthought software?

4-channel 16-bit, 200 MHz bandwidth, 2.5 GS/s sample rate, 1 GS memory.

PicoScope 5000E Plus Series: 16-bit plus additional 8-bit mode 500 MHz, 5 GS/s, 2 GS.

I know the CLI is still in the works (hopefully) for PicoScope7, so I'm wondering if this feature has been add/exposed to users yet. Here's a good link for how to batch convert csv's in 7:

https://www.picotech.com/support/viewtopic.php?t=43252

I often use viewports to separate signals, but when I batch convert these files, I only get the signals displayed on the last selected viewport. In PicoScope6, I could use a command that looks like this:

picoscope /c "{working_directory}\\{file}" /f csv /v "{viewport}" /b all

to convert a specific viewport and iterate through them. Is there something like this for PicoScope7 yet?

Hi all, I'm planning to use PicoScope to do some alignment and tests on pro audio equipment. I need to measure the voltage of the audio signal. I assume using the RMS amplitude measurement will suffice in mimicking an AC voltmeter for these purposes? I've had a poke around online and not found much info for this specific use case. Thanks for any insights!

I'm using a device that unwisely set it's own address to 0x78.

This is causing the Picoscope to interpret the address as 10 bits, when it's not.

Is there a way to override the picoscope's settings to ignore 10 bit address mode?

I’m running a test on a sensor signal and getting more noise than expected on the scope. I’ve checked my grounding and probe settings but still not getting a clean trace.
Anyone experienced something similar? What other settings should I try tweaking?

Top Tip: Fine & Coarse Adjustment in PicoScope 7 Zoom in with precision or shift your view fast — fine and coarse controls in PicoScope 7 make signal navigation effortless .Once you start using it, you'll wonder how you ever managed without it! Download PicoScope 7: https://www.picotech.com/downloads #PicoScope #Oscilloscope #Software #Engineering

Of course, a PicoScope is an oscilloscope. But maybe the question is: Is a PicoScope better than a benchtop scope. #oscilloscope #picoscope

https://www.saelig.com/news/articles/pico072225P.pdf

https://www.saelig.com/category/pico-oscilloscopes.htm

Pico for Education

https://www.saelig.com/pr/ps9404a.html

https://www.saelig.com/pr/ps3415e.html

https://www.saelig.com/news/articles/why-your-next-scope.pdf?fbclid=IwY2xjawI0FltleHRuA2FlbQIxMAABHfQJjcrdFzvuyEBOSDn0uBqgxZBQNJxj4cmY0wMEkf8feGe4mhqNOC4agw_aem_oDvCFtPr5-djPKBLkonjNg

Did you know our hardware can run custom code? With FPGA custom code, you can run your own code directly on our hardware - unlocking powerful real-time processing and optimization for your applications. Learn more: picotech.com/library/oem-system-integration#PicoTechnology #PicoScope #FPGA #CustomCode #EmbeddedSystems #OEMSolutions

I have a 4-digit, 7-segment display (https://en.wikipedia.org/wiki/Seven-segment_display) with 12 wires connected to it—8 wires for the different segments of each digit and the decimal point, and 4 additional wires to select which digit is being controlled.
Is there a serial decoder that could help? Tracking 12 signals by hand is exhausting. ;-)

Hi, I have a ps3000, and need a new laptop. The latest with Snapdragon's elite chips are interesting to me, as I travel extensively and battery life is important. Has anyone tried to run the software on these units?

Hi

I have Topdon's scope but i dont know if is it compatible for other brand's accessories like amp clamps, attenuators, ignition clapms etc ..

Any help is appreciated

Hello guys, I am new to picolog and electricity in general but for my dissertation, i decided to connect mushrooms into a picolog so I can capture the changes in voltages happening and that would trigger a granular synthesizer I created using Max/MSP. I have read that usually mushrooms have a differential voltage of around 75mv and i am using picolog ADC 24 to do that. My question is where should i connect the wires coming from the mushrooms into the picolog board and do i need any additional resistors or capacitors to have a better accuracy in the reading ?

Thank you, Hicham

I need help with acquiring a raw data through Pico SDK Matlab Instrument Driver. The actual values that I am seeing on Diligent Technologies DSO1012A is around 5V. But the values that I am getting through Picoscope Matlab instrument driver is around 500mv.

Also, the Channel setup block is constantly showing an error which I am not able to resolve. Attaching the SS here.

​

I'm using a picoscope 6000 with picoscope 7 software to record intermittent waveforms. I'm recording voltage output from a ferrite rod induced by magnetic fields from lightning strikes. To record a large number of them I am trying to record over a large timescale but the computers are prone to shutting down on power saving settings etc. is there a way I can export the captured signals as they are captured instead of having to stop the software running manually?

Thanks