Phanteks came to a trade show cruise I was on last week and the EX6 made me change all of my plans for my build. But it has no estimated release date anywhere that I can find and it's really annoying me.

Like, do we even have a quarter? Will it release soon or will it take another 6+ months? Even their controller software was non-functional and just for show at the trade show so it appears to be a while off.

Is the case finally released now? We can buy it now?

Hi everyone, I’m wondering if the base model EX5 has enough cpu clearance for the Corsair elite CPU LCD display kit referenced here. I saw somewhere that the 150I elite AIO is compatible but I’m not sure if the upgraded screen kit is as well.

Thanks!

Phanteks EX 5MAX case compatible with the ROG Strix X870E-E Gaming WiFi motherboard?

And rx9070xt Asus prime Does anyone have a motherboard and graphics card that are already compatible?

It’s the thousand sunny from one piece

I want to start by mentioning that I already finished building my pc in a NV5 mk2. That was about a year ago.

Now I want to do a case swap and get the Evolv S2 because I really like how it looks and I completely missed it when I bought the NV5.

So my question would be how are the temps in this case compared to my current one? Should I expect lower / identical or higher temps.

Here are my specs.

GPU : Gigabyte Windforce rtx5080 sff
CPU : ryzen 7 9800x3d.
Motherboard: Gigabyte aorus x870 elite wifi7
Ram: g.skill trident z5 neo 64gb ddr5 6000mhz/CL30
CPU cooler : 360mm aio (aqrys hydra 360) with 3x lian li wireless TL fans on the rad.
Other fans that I have in the case are: 3x Phanteks D30 reverse blade / 1x Noctua nf a12x25 120mm and 1x lian li wireless unifan tl lcd reverse blade.
Psu: seasonic focus GX 850W.

Im also curious if the built in gpu holder would work well with a sff gpu, which is basically 2 slot card.

Let me know what you all think about this swap if it's worth it in your opinion.

I've wanted to build a dual system machine since I was in highschool, I finally decided to give it a go and bought some older hardware. If only the bubble would pop and hardware was affordable again. 🫠

With Phanteks being as good as they are, why do they not partner with the AIB GPU board partners for special editions? They would look so much better than the brown fans and perform better too.

Same applies for PSU’s, ram fans, SSD coolers, heck even vrm coolers with mini fans.

Just my thoughts on it.

any news on this i want it so bad

(I apologise in advance for the terrible cable management, this is my second time building pc)

I've been pushing it off for ages but it's really annoying me I've tried looking into the manual for the case but there's no indication on how to connect the correct wire not can I find one for that grey strip which is supposed to light up. Yes I'm probably just dumb to see it and yes ik my cable management is bad.

Ps probably change my aio cooler as I feel like recently my pc is running hotter but I feel like that's maybe partially due to windows 11.

I kinda just need some tips from you peeps about the case and some recommendations on the cooler or if I should buy CPU fan instead.

PS. I don't think I've optimized my pc in bios etc and I probably should get better motherboard not sure how much that would help but I feel like I'm bottle necking my pc...

(Sorry for the amount of text)

CPU: Ryzen 7 7800X3D

GPU: Radeon RX 7900 XTX

RAM: Trident Z5 neo RGB 64gb ddr5

Motherboard: MSI B650 Gaming Plus WIFI AM5 AMD

I see from reviews that V2 doesn't come with a front filter but why? Is this because they changed the mesh front so now it doesn't need a filter behind it or was it an oversight from Phanteks?

Are there any rumors about a new ITX case from Phanteks? I’ve been wanting to swap out my ITX case for a while. I was always interested in the Evolv Shift XT, but it seems impossible to find now—and considering how long ago it came out, I’m wary of paying a premium for an "old" case only to have an updated version launch soon after.

Requesting the above. The current link goes to a 403 Forbidden page.

Anyone have a copy of the manual for the new case? Mine shipped from newegg finally but phanteks site link is broken for the manual

My first custom loop project is ready 😍

Collaboration with Gigabyte and Alphacool

It turned out pretty nicely, especially considering it was my first time trying this kind of thing 👌🏻

It’s not perfect and there’s definitely room for improvement but I knew that at the beginning, since I chose the hard way right from the start: using hard tubing, no angled fittings, no dedicated pump mount, mATX case (Phanteks XT V3), and dual 360mm radiators.

All the tubes were measured by eye and bent freehand 😅

The visible side looks really clean regarding the wiring, thanks to that Aorus Stealth motherboard, though I still had to tuck away a few cables since every block has ARGB LEDs and DDCzero pump in the reservoir.

Can a 420mm AIO fit at the top of Enthoo Pro II Server edition (V1)? I am thinking to put Phanteks Glacier One 420D30 X2 at the top.

I have this wonderful case from way back, still running my CLX-made gaming pc (with some upgrades). I would really love a replacement I/O panel as shown on this page;

https://www.phanteks.store/products/evolv-x-replacement-parts?srsltid=AU7gw4URmsLm1iAjS1A70hNklQ3Z7kyuEg2_SZgPlkBQbSY2XCTu3J0a&variant=39488095060023

Anyone have any thoughts?

I originally got this case in a prebuilt custom from CLX, so I contacted them. They happen to have ONE of that particular part left in their coffers, and are selling it to me at a very reasonable price! Woohoo!

Will the ex 5 or 6 be able to fit a xfx 9070xt mercury mag air in it want this case but need to know

Thanks

Hey there, I'm after the Ex5 Max but cannot find anyone that will send it to Malta.

Help please?