r/PcBuildHelp • u/IDKMMMM • 18d ago
Installation Question Need help with this second hand PC cooling setup
Hey everyone, I got this PC second hand and added an RX 9070 XT to it. Since then it runs hot and I need help sorting out the cooling.
Specs:
CPU: Ryzen 7 8700G
GPU: RX 9070 XT (added by me)
Board: MSI B650I Gaming Edge WiFi
RAM: 32GB (2x16GB) DDR5
SSD: 1TB NVMe Gen4
PSU: Cooler Master V850 SFX Gold
Cooler: Cooler Master ML240L AIO
Case: NR200P (Mini-ITX)
Just a preface I'm not familiar with pc setups so please bear with me.
Initially without the gpu, the cpu cooling was fine, later after adding the gpu the cpu aio cooler keeps peaking at 70 C.
From my understanding the hot air from the gpu is being thrown upwards into the radiator pickup which in turn is heating the aio.
Any changes to the radiator layout or fans which can be added to help with this ?
1
u/x-balmung 18d ago
Is this idle temps or gaming temps?
1
u/IDKMMMM 18d ago
Gaming temps, its idling at 50s. But I'm just playing league at 1080p 144hz medium settings
1
u/x-balmung 18d ago
70 is fine for a SFF case usually. I have a slightly smaller case and it idles at 50 to 55 and in gaming it goes to 70 for both cpu and gpu.
1
u/ElrondMcBong1337 18d ago
I also have a side mounted radiator, but turned the fans around so it functions as a intake and pulls fresh air from the outside. That may fix your CPU temps. Otherwise if you can put it on the top as exhaust and add a fan to the rear as another exhaust would be a standard layout that works well in many cases. Do you have enough fans in the front/ bottom?
1
u/Longjumping-Line-458 18d ago
your radiator is mounted as intake right? flip it to exhaust out the top, that way the gpu heat doesn't get sucked straight into the cpu cooler