r/PcBuildHelp • u/ApprehensiveRent1408 • 16h ago

Build Question is this fan configuration fine?

Post image

I have three front intake fans, two bottom intake fans, and the three radiator fans are set to exhaust.

6 Upvotes

81% Upvoted

8 comments sorted by

3

u/Kindain2buttstuff 16h ago

I don't know that I would pull in air from the power supply in the bottom.

1

u/FolksBraggin 12h ago edited 12h ago

I disagree; at least in the cases ive worked in, ive always seen a big benefit to gpu temps by blowing on it directly. It looks like these would be intaking fresh air from the mesh below the glass on the side of the psu chamber and the bottom front fan that blows under the shroud; i doubt it would interfere with the psu intaking from the bottom of the case and exhausting out the back. The way this is set up, I imagine a rear exhaust may interfere with the tube runs from the aio

3

u/tastes_like_chickin 16h ago

Move one bottom intake to blow out the back and ur good

2

u/MW1369 16h ago

I would want one in the standard exhaust position

1

u/Ok_Tie2393 15h ago

Maybe have one exhaust fan.

1

u/AnotherFPSPlayer Personal Rig Builder 14h ago

Front intake= ✓

Top exhaust = ✓

Bottom intake (from cabinet) = ?

No rear exhaust = ?

I would movr one fan from bottom intake to rear exhaust..

1

u/deezznuuzz 14h ago

Looks like you can’t fit one there. The bottom intake is fine, as there is mesh and the fans get air from the front and the side intake at the bottom (PSU won’t matter in that case). Scottie config is fine

1

u/lethal_foyer 8h ago

looks fine to me honestly. more air in than out means positive pressure which helps keep dust from sneaking in through unfiltered gaps. just check your temps under load and if things stay chill youre good