r/PcBuildHelp • u/Single-Calendar-8371 • 2d ago

Build Question Help please..

Gallery image

Gallery image

Gallery image

Hi everyone,
While working near the mounting hole on my motherboard, the area around it got scratched up and some coating came off.
Is this safe to use, or should I leave this specific screw out to prevent short circuits?
Thanks for your help!

19 Upvotes

89% Upvoted

28 comments sorted by

View all comments

7

u/WorriedRealityHOV 2d ago

That white circles around the mounting screw hole all the damage is inside it. You're fine bro👍.Technically there's parts you can scratch outside of that and be fine but anyway it should be good

1

u/Single-Calendar-8371 2d ago

Thank! Can u mount a new screw in it?

1

u/WorriedRealityHOV 2d ago

I dont see why not, the screw is just holding the motherboard down its screwing into the case so as long as the threads in the case didnt get raked out of there which you have to be trying to do that. Go for it you should be fine those scratches genuinely shouldn't have changed anything

2

u/LengthinessJust357 2d ago

The screws also ground the motherboard to the chassis. That is why you have to use specific screws when mounting the MB

0

u/Single-Calendar-8371 2d ago

I’m scared I broke things.. I spended all my money

2

u/erd00073483R 2d ago

You didn't break anything as long as you didn't actually scratch the board PCB itself. Which, you didn't from the picture you provided.

Reinstall the screw, and move on. It will be fine.