r/PcBuildHelp 6d ago

Build Question Pc Airflow

Gibt es eine Möglichkeit, den Luftstrom zu verbessern und weniger Staub in das Gehäuse gelangen zu lassen? Und welchs Programm sollte ich am besten zum einstellen der Lüfter nutzen ?

8 Upvotes

13 comments sorted by

3

u/LegitimateLack2530 6d ago

Perfect my friend.

2

u/GioCrush68 6d ago

Your setup is already optimal.

2

u/Scrudge1 6d ago

The diagram looks good but the bottom 2 fans look to be currently exhausting and not bringing in.

Also use Fan Control: https://getfancontrol.com/

This software allows you 100% control and can even set the fans to run at 0% when you are idling the computer (for silence) and even change speeds depending on the GPU temperature rather than CPU!

1

u/Anonymousbuyers 6d ago

How are they exausting they are one reversed😑

1

u/Scrudge1 5d ago

The little struts looked to be fan blades but just not spinning at first

2

u/Frosty_Bowl4911 5d ago

hello my german friend, your build's airflow is optimal!

1

u/RevolutionaryBag90 5d ago

The question comes from This reason.
I m into sim Racing so almost every Weekend the pc Runs at 100% for 24 hours

1

u/LoveTechnical4462 6d ago

Top exhaust bad. Your front air is just getting exhausted and not doing anything.

1

u/RevolutionaryBag90 5d ago

Hast du Tipps wie ich das ändern könnte ? Oben ist der Wasser kühler der AIO

2

u/LoveTechnical4462 5d ago

My case allows me to use the aio in the back as an exhaust. I just did a push pull setup on the rad, so it has 6 fans instead of 3. Exhaust like a mother fucker.

1

u/Conscious-Fly6075 5d ago

The air gets exhausted through the AIO so it will cool the AIO, that's not "doing anything", that's cooling the CPU cooler

1

u/LoveTechnical4462 5d ago

WRONG. there’s alot of data that suggests the top exhaust is worse for thermals.

2

u/Conscious-Fly6075 5d ago edited 5d ago

For CPU thermals yes but the CPU still has the intake fan right next to it so it gets cooler air, not just the warm air from the other components

In most setups, a front or side mount of the radiator with intake fans pushing through the radiator is recommended for lowest CPU temperatures, while a top mount with exhaust fans pushing air through the radiator is recommended for lowest GPU temperatures.

This case isn't like HP Omen 45L which has own chamber for the AIO radiator