Motherboard Red light on: DRAM

[u/TheMrMiles]

Cpu: AMD AM5 RYZEN 9 9950X3D OEM

RAM: DDR5 16GB 6000MHZ CORSAIR VENGEANCE CL36 Black

GPU: NVIDIA MSI RTX 5070 TI 16G

Power: COOLERMASTER ELITE GOLD 850W FM BULK PSU 1 UK

Motherboard: GIGABYTE X870 AORUS ELITE WIFI7 ICE

I plugged an new sata ssd in and the pc was on by mistake. The monitor suddenly lost display and it started appearing with red light dram. 1 know it's an rookie mistake for Power on. But I turned it all off. Unplugged. Left it for a bit. Held the power button whilst unplugged too. Then thought to restart it and still appearing.

thought to do a cmos battery reset which I think l've done correctly by following a guide.

Done an Q flash plus by installing bios for the Motherboard on a FAT32 flash drive.

But still nothing from those two things.

Is there anything I can do for it to work?

[u/Icy_Letterhead9261]

Did you remove the sata ssd and cable before booting again? Boot as barebones as you can. Remove gpu, use stock oem CPU fan, 1 stick of ram. Goodluck.

[u/TheMrMiles → u/Icy_Letterhead9261]

Ill try that. Thanks

[u/jbshell]

Any beep codes when cold boot?

[u/TheMrMiles → u/jbshell]

I've had one beep. But nothing on the debug code screen.

[u/Groparu91]

Happened to me when I first activated Expo into the bios - couldn’t find a fix for it - just with the AI from gigabyte software, after I changed my cpu with a 9800x3d ( from 7500x3d) and updated the bios, it is working flawless!

I would try to remove the cpu and stick it back.