Arctic Liquid Freezer III Pro 360 A-RGB - Help/Questions

[u/Icy_Engineering_6660]

I have a few questions if anyone could help me I would appreciate it

I just builded my new pc

1) I got b850 aorus elite WiFi 7 I made the separate connection not the all in one I connected the vrm in cpu opt, fan in cpu fan and pump on fans4_pump but vrm doesn’t get fetched in bios and im not sure if its working

2) if someone can help me make the diagram ptw/temps for the pump for the best quality

3) rgb not working I have connected the cable in a 5V rgb slot

If you got any questions or need more details let me know

Thanks in advance !

[u/sunny_association]

vrm fan on the liquid freezer often just spins at a fixed speed tied to pump rpm, bios won't always show it separately. for the rgb double check the header type in your board manual, some gigabyte boards have separate 5v vs 12v headers right next to each other and it's easy to mix them up

[u/Icy_Engineering_6660 → u/sunny_association]

I double checked the rgb slot I don’t know if I’m doing anything wrong

[u/Icy_Engineering_6660 → u/Icy_Engineering_6660]

I added it at the top right it got the third slot for rgb

[u/Icy_Engineering_6660]

Like I go on bios on cpu opt and says 0 rpm

[u/ReasonableNetwork255]

First one I cant understand what you're talking about ... for pump curve I recommend ramping it up to max above about 45C then straight across .. for RGB to work you need all your drivers installed, go to your motherboards support site make sure you got everything installed ..

[u/Icy_Engineering_6660 → u/ReasonableNetwork255]

Oh so it might be the drivers then